Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
I removed the jack from under the passenger seat and placed the Kicker Hideaway. Used the grey AUX passthrough harness under the driver side dash to run power. Grounded the sub/amp using the nut from where the jack was mounted (sanded to bare metal). Accessed and tapped front speaker +/- wires...
I would double and triple check everything while ordering a truck right now. They have removed so many things from packages that were included pre-chip shortage.
I installed a Kicker Hideaway 10 inch powered sub under my passenger seat and it really fills out the system. Gives it the bass that the Alpine Sub is missing.
I just mounted a set of Sailun S637T, 14 ply, Load Range G tires that support 4,080 lbs each at 110 PSI. Also rated up to 75 MPH. These went on a Grand Design Reflection 311BHS. 11,368 dry with 2,180 pin. They were $200 each.
I have a 2021 2500 Ram as my personal vehicle and a 2021 1500 from my employer. Being that the 2500 is still on rear coils and shocks the trucks are similar in ride quality. The 2500 is only a little more stiff. If you go with the 21RWS you will want the 2500. A well optioned 1500 is going to...
Finally got around to installing the factory puck system in the Rambox bed and a 7 pin. I would recommend going a little bigger than a 3-1/2 inch hole saw that the directions call for. 4 might be a little big but something in between would have been better.
Sent from my iPhone using Tapatalk