Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Compatibility brackets, commonly used for snow plows. Regardless of there name, if these brackets are removed, our intercooler guard cannot be installed. Conversely, on 3500 models these brackets are not stock so we include them in the kit when purchased from us.
Install is pretty easy! You can do it one of two ways, remove the grille or remove the bumper. The bar bolts into OEM holes with provided hardware. For power wagon owners it's easier to remove the grille since they will have additional steps from the winch. In either event, the bar can be...
For those wondering. Transmission skids are at the shop, mounting brackets are back from powder coat, hardware kits are assembled and we are beginning to package kits on Wednesday. For those of you with open orders you will see tracking by the end of the week.
Additionally, we have kits IN...
The oil door bolts on and off very easily, I think any Pep Boys tech or similar could do it and I highly doubt you would ever catch any flak for it. That being said, the oil door is oversized enough that you and a few tools could make quick work of a no mess oil change.
If you had to do a...
Total weight for the complete set is 95lbs. The transmission skid with the steel brackets comes in at around 40lbs whereas the 3 bar replacement system that includes two full skids is around 50lbs combined!
We’re sorry it sketches you out :(
The hole in the frame is not square to the faces of the inside and outside of the frame, which causes some ‘misalignment’. Based on the fact they are on different axis’s, coupled with the fact that our 1/4” steel bracket does not allow any flex, results in a...
A couple of new products for those of you who are scared of the dark!
We recently released our brand new front bumper light mount for the 2010-2018 RAM HD trucks as well as the 2019+ RAM HD trucks. This product has come to be so you all have a better solution for securely mounting up to 5 off...
GODZ MFG Skid Plate Progress! We got all of our transmission skids back from powder last week with a host of other parts and accessories. Additionally, we finished cutting all of the .250" steel plate and bending it to prep it for welding.
Today, we started welding. What you see in the last two...
A slot could totally be done however, even if we used something like a high density polyurethane washer on both sides of the bracket for you to have it tight enough to not rotate while driving, but loose enough to slide, you would probably wear down the powder coat overtime and ultimately this...
Like this.....
We'll do it, just ask and we'll wave the wand. This would be a spin off of our Chase Light/Antenna Bracket which is made of .125" Stainless Steel and Powder Coated Black.
https://godzmfg.com/products/godz-mfg-chase-light-antenna-bracket