Sanity Check - 2500 Bed Rails and Rear Cutouts

[1651Naismith]

For whatever reason, I only noticed last night that the rear of the bed rails have the cutouts "open" whereas the front ones are still in place. I looked at the websites of a couple of dealers near me and its *seems* that is how they come (covered in the front, open in the back). But, it was difficult to tell from the pics as they are not showcasing the top of the bed rail to prospective buyers, LOL.

Do the rear cutouts come open? I'm not overly concerned as I have a topper on order. If covers/plugs exist, I'll put a couple in just to prevent any water leaking in the bed.

Pics attached for reference.

 

[Sir Snacksalot]

Yes that is how they come. Front ones can be cut out


Sent from my iPhone using Tapatalk

 

[Wobly]

My Power Wagon has the fronts covered.

Sent from my SM-N975U using Tapatalk

 

[Chris1911]

They are all like that. I got these for mine as i was getting a little water in the bed with a bed cover.

https://www.amazon.com/gp/product/B07NBVL2JB/

 

[1651Naismith]

Yes that is how they come. Front ones can be cut out


Sent from my iPhone using Tapatalk

Thanks. For whatever reason, I didn’t notice them until yesterday. Needed the sanity check as I usually notice stuff like that.

 

[1651Naismith]

They are all like that. I got these for mine as i was getting a little water in the bed with a bed cover.

https://www.amazon.com/gp/product/B07NBVL2JB/

Brilliant! I just ordered a set. Thanks!!

 

[Sir Snacksalot]

Brilliant! I just ordered a set. Thanks!!

Another option would be the offerings from bill ring USA if you haven’t seen those, gonna order some myself soon, a little more functional


Sent from my iPhone using Tapatalk

 

[Brewbud]

They are all like that. I got these for mine as i was getting a little water in the bed with a bed cover.

https://www.amazon.com/gp/product/B07NBVL2JB/

Someone putting their 3D printer to good use.

 

[Speedracer93CobraR]

Another option would be the offerings from bill ring USA if you haven’t seen those, gonna order some myself soon, a little more functional


Sent from my iPhone using Tapatalk

Do you have a link? I don't see anything related to that on a google search.

 

[Jarred]

Do you have a link? I don't see anything related to that on a google search.

He meant Bull Ring:

Gunmetal Flush Fit Retractable Tie Down Anchors | '95+ Dodge Ram | '14 -19 Toyota Tundra - Crew Max | 22'+ Hyundai Santa Cruz | #5068 & #5066

Our Retractable Tie-Down Anchors fit in line with the rail cap, and make it easy to tie down loads in your bed. Stainless Steel Ring snaps up when you want to use it, and snaps flush when you dont. With a 1000 lbs rating, and BullRing Lifetime Guarentee.

www.bullringusa.com

Bought a set myself but haven't installed yet.

 

[CdnHO]

For whatever reason, I only noticed last night that the rear of the bed rails have the cutouts "open" whereas the front ones are still in place. I looked at the websites of a couple of dealers near me and its *seems* that is how they come (covered in the front, open in the back). But, it was difficult to tell from the pics as they are not showcasing the top of the bed rail to prospective buyers, LOL.

Do the rear cutouts come open? I'm not overly concerned as I have a topper on order. If covers/plugs exist, I'll put a couple in just to prevent any water leaking in the bed.

Pics attached for reference.

Truxedo carries plugs. Had to get six for my long bed

 

[Trooper]

Yes that is how they come. Front ones can be cut out


Sent from my iPhone using Tapatalk

i have 2019 Laramie, mine came closed off front and rear