What's new
By:
Ram Heavy Duty Forum

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

What did you do TO your RAM today?

jsalbre said:
Wouldn’t happen to have an audio clip of the Gibson, would you?

I hate that my big 6.4 is quieter than the 2.0 I had on my last VW.
Click to expand...
I didn’t miss this. I just haven’t had time. I’ll try to get it tomorrow.
 
The tailgate cap and seal all look real good. I don’t think it will leak, but every cap and tonneau cover I’ve ever had have leaked a little. All required some DIY fixin’
 
TogaLock77 said:
The tailgate cap and seal all look real good. I don’t think it will leak, but every cap and tonneau cover I’ve ever had have leaked a little. All required some DIY fixin’
Click to expand...

I had an ARE Z on my old truck and it was fantastic....minimal, if any, leaks.
I don't expect a watertight compartment, but this was like a sieve.

My MX has the 'windoors', all the handles were loose and leaked, that at least was an easy fix.
The back door was the worse and water would just come pouring in from the corner during a rain because the plastic trim that covers the tailgate stops way too short of the corners leaving a large gap...I fabbed up some plastic bits to extend the coverage.
There is no gasket between the plastic cap and the door proper so when you open the door, the water that has pooled there comes pouring out; used some RTV to seal that bit of fun.
There is no gasket between the T Handle and the door, again, water pools and pours on you when you open the back...picked up a silicone kitchen mat and made a gasket.

FWI W, this was the gap on both sides between the door and frame
1600945516374.png
 
Gondul said:
I had an ARE Z on my old truck and it was fantastic....minimal, if any, leaks.
I don't expect a watertight compartment, but this was like a sieve.

My MX has the 'windoors', all the handles were loose and leaked, that at least was an easy fix.
The back door was the worse and water would just come pouring in from the corner during a rain because the plastic trim that covers the tailgate stops way too short of the corners leaving a large gap...I fabbed up some plastic bits to extend the coverage.
There is no gasket between the plastic cap and the door proper so when you open the door, the water that has pooled there comes pouring out; used some RTV to seal that bit of fun.
There is no gasket between the T Handle and the door, again, water pools and pours on you when you open the back...picked up a silicone kitchen mat and made a gasket.

FWI W, this was the gap on both sides between the door and frame
View attachment 7445
Click to expand...
That is a big gap! Nothing like that on mine luckily
 
decided no new truck is not complete without a windshield rock chip....less than a month old and first rock chip...I hate chip sealed roads. Met someone coming the other way and sure as **** they flung a rock..
 
what I did to my rig today was not physical, well at least not yet anyway, just pure preventive maintenance love. Everybody talks about using the ceramic coating on there rides to protect and shine like no other. So I decided to venture outside my normal mguirers primo wax wich had always looked great I thought until I saw some ceramic pics on here. I've been talking to torque about there product. Last wk they sent me a 24hr 20% off coupon, then it went away. 3 days later they sent me a free s&h coupon, then it went away. This morning they reached out to me and asked what do we have to do to earn your buisness. I told them to combine the 20% off and free s&h offers together and ill punch in my cc#. They bit and we signed, this is what i picked hopefully it's good, still expensive for an 8 oz bottle but $31.96 is way better than $45. Once again, being an ole lonely and very patient buyer, pays off. :cool:
Now y'all want me to negotiate with naviks for us;):p:rolleyes::eek:o_O, i guess I need to say if the emojis don't translate, just kiddddingggg, jeeshhhhhhScreenshot_20200925-130930.png
 
Buppies said:
Would love to know what you think of this product
Click to expand...
Me 2, well see. Supposed to be easy to use and allot less work than waxing. I guess the biggest part is the prework in making sure its 100% clean before applying, but honestly , who doesn't know that
 
Installed the Thuren sway bar this morning, so far I’m liking the improved ride quality. Will have to get the coils, shocks, track bar and steering stabilizer to finish things off.

7dacaa6dc1aff6a7edd20c321cb49e7d.jpg



Sent from my iPhone using Tapatalk
 
You must log in or register to reply here.
Back
Top