Help testing Active shutter 2022- 2500 6.4 hemi

[jav1]

New here- looking for some help, if someone would be so kind?

Problem:
I replaced the active shutter assembly on my truck, (along with the connector) due to a small front end collision. I cleared all codes and ran the "Replaced Active Shutter" routine with my scan tool.

I'm still getting an - " U11E9 DTC - Lost Communication with AGS" code after a few key cycles.

Does anyone have access to the wiring diagram from that unit to the PCM? I'd like to make sure the wiring is good before I contact the Active shutter vendor to etell them the new unit appears defective.

Thanks in advance

John

 

[CdnHO]

Not sure if this helps. You should at least be able to test it by connecting the battery and ground pins.

 

[jav1]

Not sure if this helps. You should at least be able to test it by connecting the battery and ground pins.

Thank you so much!! F41 blown.... I feel rather stupid for not checking that 1st. Hopefully I can repay your kindness someday!