Bolt Thread Size

[red]

Hi everyone, I just had some body repairs done on my 2020 3500 where they had to remove my front bumper. Of course, they missed a couple of fasteners when they put it back together. On the edge of the bumper, there's a single screw that threads towards the front through some plastic splash shields. Does anyone know the thread size and pitch needed for this? See picture and note the hole in the bumper edge with no screw. On the drivers side they stuffed a push connector in the hole and I know for certain this should be a bolt/screw of some sort.

 

[SpeyRam]

its a 10MM bolt on mine

 

[red]

its a 10MM bolt on mine

Thanks. It's the thread size I'm looking for. Are you able to quickly take one out, and post a picture of it? The dealership is even having problems figuring out the part number for those bolts.

 

[CdnHO]

Thanks. It's the thread size I'm looking for. Are you able to quickly take one out, and post a picture of it? The dealership is even having problems figuring out the part number for those bolts.

If no one responds, direct message me in a couple of days. I will take one out and check it. I have one of those boards that checks fastener thread sizes. Too dang cold out right now.

 

[red]

If no one responds, direct message me in a couple of days. I will take one out and check it. I have one of those boards that checks fastener thread sizes. Too dang cold out right now.

Will do. Appreciate the help. The dealership is no help at all. They claim it's the new style parts diagrams they have to work with. The larger parts are at the top of the diagram with the fasteners all in a straight line below the larger parts. The description of each fastener is vague, to say the least.

 

[SpeyRam]

Will do. Appreciate the help. The dealership is no help at all. They claim it's the new style parts diagrams they have to work with. The larger parts are at the top of the diagram with the fasteners all in a straight line below the larger parts. The description of each fastener is vague, to say the least.

It’s a flanged hex head about 1” long or in metric 25.4mm!

 

[red]

It’s a flanged hex head about 1” long or in metric 25.4mm!

Thank you for the picture! It helps me a lot. I'm betting the thread is M6 x 1mm pitch. Thanks again, I really appreciate the help

 

[CdnHO]

Thank you for the picture! It helps me a lot. I'm betting the thread is M6 x 1mm pitch. Thanks again, I really appreciate the help

You are right. And it is still friggin cold out there. LOL

 

[red]

You are right. And it is still friggin cold out there. LOL


View attachment 82710

Thanks for the size/pitch confirmation. Hang in there, spring is just around the corner!

 

[CdnHO]

Thanks for the size/pitch confirmation. Hang in there, spring is just around the corner!

We are in south Texas. 32. Gonna be 85 next week. Got a thin skin in my old age. LOL

 

[red]

We are in south Texas. 32. Gonna be 85 next week. Got a thin skin in my old age. LOL

I'm in calgary, canada. It's been -20C for three weeks straight here. Brrrrrr!!!!

 

[CdnHO]

I'm in calgary, canada. It's been -20C for three weeks straight here. Brrrrrr!!!!

That is the freezer section of Canada. LOL. We live in Southern Ontario and escape to South Texas for the winter. We are going through a temporary cold snap for which the locals are blaming on Canada.