What's new
By:
Ram Heavy Duty Forum

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

fender badge placement

J

jeffawats

Member
Messages
87
Reaction score
63
Points
18
Location
Thompsontown Pa.
My 24 Hemi did not come with any fender badging so I ordered so matte black 392 Hemi emblems to match my night trim.Does anybody have measurments for placement like OEM badges? Thanks!
 
I did the same thing with my 2024. I found a 2022 on the dealers lot with the factory badges and took measurements. They are placed 1.25" in front of the door/ fender gap, 15/16" below the body line towards the rear of the fender, and 1.00" below the body line towards the front of the fender. The body line slopes downhill slightly from front to back, and these measurements will keep the badge level. I laid it all out with painters tape to put them on.PXL_20240308_144303001.jpgthumbnail_PXL_20240314_205850682.jpg
 
79 300 said:
I did the same thing with my 2024. I found a 2022 on the dealers lot with the factory badges and took measurements. They are placed 1.25" in front of the door/ fender gap, 15/16" below the body line towards the rear of the fender, and 1.00" below the body line towards the front of the fender. The body line slopes downhill slightly from front to back, and these measurements will keep the badge level. I laid it all out with painters tape to put them on.View attachment 80394View attachment 80395
Click to expand...

You did better than the factory did with my ‘21 badges. Passenger side is wonky for sure.


Sent from me
 
79 300 said:
I did the same thing with my 2024. I found a 2022 on the dealers lot with the factory badges and took measurements. They are placed 1.25" in front of the door/ fender gap, 15/16" below the body line towards the rear of the fender, and 1.00" below the body line towards the front of the fender. The body line slopes downhill slightly from front to back, and these measurements will keep the badge level. I laid it all out with painters tape to put them on.View attachment 80394View attachment 80395
Click to expand...
looks great
 
Possibly. I removed the hemi badges because I am not a fan of the red. When you buy a night edition all the badges should be black. I will probably replace the 2500 badges first, if I can find them without red.
 
I have some of those 392 badges in my cart. Where did you order them?

& Share when you put them on please! Currently trying to decide between the white and red "HEMI" on my white truck

1734708158889.png1734708417340.png
 
bobeazy said:
I have some of those 392 badges in my cart. Where did you order them?

& Share when you put them on please! Currently trying to decide between the white and red "HEMI" on my white truck

View attachment 80414View attachment 80415
Click to expand...
Personally if I were to do it, I wouldn’t go with the white, it would blend too much with the white paint. I would probably go with the first one, I think it would match the hood badge better.
 
I think my truck looks way better without the badges. I wish I could have removed the 2500 badges on the hood too.
 
You must log in or register to reply here.
Back
Top