What's new
By:
Ram Heavy Duty Forum

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

What did you do TO your RAM today?

Well fellas I finally got the last fitting to run my quick connect of my on board air supply (with my new Horn blasters HB-1NM compressor) to my rear bumper. Was not near as bad as I feared it to be. All ready to air and deflate everything now lol.
 

Attachments

  • 20240802_150949.jpg
    20240802_150949.jpg
    523.5 KB · Views: 65
  • 20240802_150503.jpg
    20240802_150503.jpg
    260.8 KB · Views: 65
dbb737a65f306ce821de4ae1dbaaaf09.jpg


Powerstop rotors and pads @ 26k.

241f386c68b5a9e5b068c72bd08701b7.jpg

Front takeoff.
d38e735e7186a9b2adcab815998144e7.jpg

Rear takeoff. Piston side pad on both rear wheels had a fair amount of crud.
d39045d5a83c02f344c6f6a81d688800.jpg

Likely cause of at least some of my pedal thump. Bad casting is what that appears to be. Large porous area.


Sent from me
 
whitexc said:
dbb737a65f306ce821de4ae1dbaaaf09.jpg


Powerstop rotors and pads @ 26k.

241f386c68b5a9e5b068c72bd08701b7.jpg

Front takeoff.
d38e735e7186a9b2adcab815998144e7.jpg

Rear takeoff. Piston side pad on both rear wheels had a fair amount of crud.
d39045d5a83c02f344c6f6a81d688800.jpg

Likely cause of at least some of my pedal thump. Bad casting is what that appears to be. Large porous area.


Sent from me
Click to expand...

No offense but glad I no longer live in the rust belt.
 
Brutal_HO said:
No offense but glad I no longer live in the rust belt.
Click to expand...

None taken. It’s what we deal with. This truck gets undercoated annually and plenty of washes. Rust never sleeps!

I put about 150 miles on the truck after the brake job. They stop nice after the bed in process and the smooth pedal is worth the money/effort alone. The evolution pads should do fine for how I use the truck.


Sent from me
 
Today I have fitted my UHF or CB as some know it.
Also installed the wiring for the caravan to charge the battery's while towing and the wiring for the caravan EDC and hooked up the caravan this afternoon and took it for a quick test run.
Pleased to report that everything is working the way it should.
 
oppizzippo said:
You know you don't usually get damaged like that mall crawling, and you get Starbucks! J/K! I bet you were glad you had that floor jack. I never leave home without one.
Click to expand...
It was either at target or victoria secret for my stockings... those dang granite curbs.

It only went flat because I parked at a party with it at 6 o'clock. Added some air with the on board air, rolled forward and it held 45 psi for 3.5 hours sitting, then the ride home. Only lost air when I hung it on the carrier. So strange, have no clue when it actually happened.
 
oppizzippo said:
You know you don't usually get damage like that mall crawling, and you get Starbucks! J/K! I bet you were glad you had that floor jack. I never leave home without one.
Click to expand...
Also, I didn't want to flex too hard at the party... I carry a Pro Eagle in the truck. I already had all the guys clamoring about the compressor. lmfao :cool:
 
I did a full drive line service today and many have asked me why am I waisting my money doing it at 5000km and this is what my gearbox looks like inside. Cant upload my photo its to big and I am too technology handicapped to fix it
 
You must log in or register to reply here.
Back
Top