Not sure about the design based on the angle. Would it limit the width of the bed for like a 4x8 sheet of decking? Or maybe use rounded torx or Allen head bolts too.
Ram Heavy Duty Forum
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
What did you do TO your RAM today?
- Thread starter LamboTexas
- Start date
Driven with them at night yet?
Rockcrawlindude
a rock crawlin’ dude
I’m not sure of the necessity of them but from here they look like a no-go with the decked system
GODZ_MFG
MIA
The flanges that enter the bed allow you to pass sheet goods up to 51" wide. We haul aluminum and steel sheet and took this into consideration!
As for hardware, we used hex head in the prototypes but will swap over to button heads in stainless on production.
GODZ_MFG
MIA
A little extra strength never hurt anyone
However, I cannot confirm Decked fitment, I will need to track down a truck with one to verify.
Lucky Devil
Well-Known Member
I made and installed a fire extinguisher mounting bracket. Fits nicely behind / beneath the driver-side back seat. I keep emergency gear in a bag in front of it - can yank it out quickly to get to the extinguisher if needed.
GODZ_MFG
MIA
That's slick! Nice work!
Lucky Devil
Well-Known Member
Rockcrawlindude
a rock crawlin’ dude
Actually, i was wrong. looks like it would probably clear. You’ve got about a foot width before a bracket would be in the way. The wheels don’t move, the drawers roll over them.A little extra strength never hurt anyone
However, I cannot confirm Decked fitment, I will need to track down a truck with one to verify.
NHOverland
Well-Known Member
IndyRamMega
Well-Known Member
- Messages
- 596
- Reaction score
- 932
- Points
- 93
Not yet....might go out in a bit....
DeadEnd
Active Member
- Messages
- 109
- Reaction score
- 78
- Points
- 28
Are those 255/80/17's?
If nothing else having extra spot for tie downs would be a benefit from time to time.A little extra strength never hurt anyone
However, I cannot confirm Decked fitment, I will need to track down a truck with one to verify.
GODZ_MFG
MIA
Bottom we are definitely clear, how does the top deck interface with the bed wall?
GODZ_MFG
MIA
Yeah, mine have been great for strapping in my snowmobile and just general stuff in home depot trips and such.
ColderWeather86
Active Member
Do the corner lights turn on when you turn like the fog lights do?Finally got started on my BajaDesigns linkable light kit for the Ram truck. I created a thread with more pics of the brackets and some other details. Still need to do the wiring.
BajaDesigns XL Linkable Bumper Light Kit Install
Finally got around to beginning this install. Today I was able to get the lights mounted and hopefully tomorrow I’ll wrap it up with the wiring. Spent a little over 5 hours on it today in my garage. It does require removing the front bumper which I was able to do by myself but I did phone a...hdrams.com
Sent from my iPhone using Tapatalk
GODZ_MFG
MIA
On this bar they do not, but the benefit of the linkable systems is you can separate the lights. So, in theory, if you broke out the plugs on each corner light, and set up a positive trigger from the respective fogs, you could have it function like this.
They are hooked up to the same harness the factory ones are, if you don't have them on they will turn on at turn like factory, if they are just on they stay on all the time
