No "off" setting?

[OuterUB]

My headlights don't seem to have an "off" setting... WTH?

 

[H3LZSN1P3R]

The circle is the OFF setting but you are in canada like me so you have DRL enabled in the computer which leaves the lights on when its running also the Signature lighting strips are aways on, this stuff can be changed with AlfaOBD

 

[OuterUB]

What circle?

 

[Crusty old shellback]

Turn counter clockwise to the far left stop.

 

[OuterUB]

Tried as you suggested.... Marker Light setting is as far counterclockwise as it goes.

 

[Ostracize]

Strap wrench and give it to her...
Kidding, don't do that.

 

[OuterUB]

Strap wrench and give it to her...
Kidding, don't do that.

Was thinkin' 'bout that very thing.

 

[Ostracize]

Jokes aside... Is this a change to Canada trucks? Or all '22s? Quite odd.

 

[OuterUB]

Not sure... but here's the answer to my original question, right out of the manual.

 

[Crusty old shellback]

Was just going to say, must be a Canadian thing that you dont have an off position.

 

[OuterUB]

Yessir.

 

[H3LZSN1P3R]

Was just going to say, must be a Canadian thing that you dont have an off position.

I think its a 2022 thing


(Ignore the dust and dirt no time to clean the truck as i am remodeling both mine and the inlaws kitchens)

 

[Crusty old shellback]

But you have the off selection.
That little "O" position.
He doesent have that.

 

[Darmichar]

I previously had an '18 silverado gasser. The canadian guys were talking on the forum there about taking the spring out of the switch in their trucks that prevented them from being turned off like the US trucks. Think this has been a thing since then because I dont remember them complaining about it before then.

 

[Ostracize]

But you have the off selection.
That little "O" position.
He doesent have that.

I think he's odd flexing that his maple HD has the "O" cause of US panel installed with alfaobd rejiggering the bcm settings to US spec.... Though I could be mistaken.

Edit... Actually I think the pre 22's had the "normal" panel but the bcm settings were config'd differently for drl laws in Canada... There's a couple threads on here about it... Too lazy to link them lol

 

[H3LZSN1P3R]

But you have the off selection.
That little "O" position.
He doesent have that.

Thats what i am saying i am in canada and my 19 has the off setting so does my buddies 21 so i think they dropped the off setting for the 22s or at least the Canadian ones

 

[H3LZSN1P3R]

Edit... Actually I think the pre 22's had the "normal" panel but the bcm settings were config'd differently for drl laws in Canada... There's a couple threads on here about it... Too lazy to link them lol

Thats what i am saying as well because this is the factory panel in my 19 and i am in canada…

 

[OuterUB]

Just doesn't make sense to not be able to turn them off outright.

 

[H3LZSN1P3R]

Just doesn't make sense to not be able to turn them off outright.

Its just the governments and manufactures pushing people to have it their way or no way

 

[CdnHO]

Its just the governments and manufactures pushing people to have it their way or no way

Don't get me started.