What did you do TO your RAM today?

[DougB]

Those look 3D printed. How's the quality?

I could print some of these up and sell them here in the Buy/Sell section. It would be cheaper than that Amazon listing.

Speaking of 3D printed parts for our trucks. There is also a 3D printed A pillar ball mount for the Edge CTS monitor that could be duplicated and done for much less $. Edge sells an aluminum mount for $5 less than the 3D printed one. Go figure.

Moonlight Diesel 2800101 Pillar Mount for Edge Products Insight CT CTS 2 CT2 CTS2 Evolution Juice

EDGE 38603 CTS3 Display Mount

I want a mount for the iDash gauge but want it closer to the pillar than these allow since they are designed for the CTS monitor. I’m going to see what I can draw up in CAD and get a friend to print for me.

I have the tan pillars tho which makes matching color little more difficult. Black is easy to match.

 

[Matt58]

It should flex real nice now!!!


Sent from my iPhone using Tapatalk

 

[CdnHO]

Installed a truxedo pro x15 tonneau, looks good. No pics yet.

Got one on mine. Like it.

 

[Brutal_HO]

“Installed” rear stake pocket plugs.

https://smile.amazon.com/dp/B078P6QMT2/ref=cm_sw_r_cp_api_glt_fabc_ENYHDVD3KTCFX66822NH?_encoding=UTF8&psc=1

View attachment 29694View attachment 29695View attachment 29696View attachment 29697

Now I know what my next 3D printer DIY project needs to be.

Have black PETG on hand too.

 

[Matt58]

Speaking of 3D printed parts for our trucks. There is also a 3D printed A pillar ball mount for the Edge CTS monitor that could be duplicated and done for much less $. Edge sells an aluminum mount for $5 less than the 3D printed one. Go figure.

Moonlight Diesel 2800101 Pillar Mount for Edge Products Insight CT CTS 2 CT2 CTS2 Evolution Juice

EDGE 38603 CTS3 Display Mount

I want a mount for the iDash gauge but want it closer to the pillar than these allow since they are designed for the CTS monitor. I’m going to see what I can draw up in CAD and get a friend to print for me.

I have the tan pillars tho which makes matching color little more difficult. Black is easy to match.

It would be sweet if someone made one of those for the Switch Pro…


Sent from my iPhone using Tapatalk

 

[owdiss78]

Picked truck up Monday January 3 drive home 3 hours put my nice wheels on. Today January 9 I put on weather tech mud flaps and Monday January 17 window tint gets done. Can’t post a pic so I guess I will later

 

[owdiss78]

Picked truck up Monday January 3 drive home 3 hours put my nice wheels on. Today January 9 I put on weather tech mud flaps and Monday January 17 window tint gets done. Can’t post a pic so I guess I will later

 

[CdnHO]

“Installed” rear stake pocket plugs.

https://smile.amazon.com/dp/B078P6QMT2/ref=cm_sw_r_cp_api_glt_fabc_ENYHDVD3KTCFX66822NH?_encoding=UTF8&psc=1

View attachment 29694View attachment 29695View attachment 29696View attachment 29697

Truxedo has the plugs for around 13 bucks a set.

“Installed” rear stake pocket plugs.

https://smile.amazon.com/dp/B078P6QMT2/ref=cm_sw_r_cp_api_glt_fabc_ENYHDVD3KTCFX66822NH?_encoding=UTF8&psc=1

View attachment 29694View attachment 29695View attachment 29696View attachment 29697

“Installed” rear stake pocket plugs.

https://smile.amazon.com/dp/B078P6QMT2/ref=cm_sw_r_cp_api_glt_fabc_ENYHDVD3KTCFX66822NH?_encoding=UTF8&psc=1

View attachment 29694View attachment 29695View attachment 29696View attachment 29697

Truxedo has them for around 13 bucks a set.

 

[DougB]

Truxedo has the plugs for around 13 bucks a set.

I looked at those, but they are not flush with the top of the factory rails. I have a tri-fold bed cover that fits ON the rails so need the flush style.

 

[JALOPYJUNK]

Stock 275/70 R18 discount tire direct had a deal tax and all they were less than $750 shipped to the door.

Same tires I put on my 2021 Tradesman 2500. So far I like them. The all terrain Firestones had to go.

 

[kpecks]

“Installed” rear stake pocket plugs.

https://smile.amazon.com/dp/B078P6QMT2/ref=cm_sw_r_cp_api_glt_fabc_ENYHDVD3KTCFX66822NH?_encoding=UTF8&psc=1

View attachment 29694View attachment 29695View attachment 29696View attachment 29697

Now I know what my next 3D printer DIY project needs to be.

Have black PETG on hand too.

That seller on amazon has 320 reviews for his 3d printer stake covers... at $22.49 a pop... not a bad return on his investment!

 

[Brutal_HO]

Now I know what my next 3D printer DIY project needs to be.


That seller on amazon has 320 reviews for his 3d printer stake covers... at $22.49 a pop... not a bad return on his investment!

Have to have a small printer farm.

I'm making some Valentine's and Easter stuff for my wife to sell in her craft shop space (she does mostly sublimation printing on purchased products) and it just takes so long to print quality hi-res stuff and a decent enough printer. Mine's "only" an Ender 5 Plus (go big or go home), but the prints on it have been really great, especially for my beginner status.

 

[Rockcrawlindude]

Truxedo has the plugs for around 13 bucks a set.


Truxedo has them for around 13 bucks a set. View attachment 29715

Now I know what my next 3D printer DIY project needs to be.


That seller on amazon has 320 reviews for his 3d printer stake covers... at $22.49 a pop... not a bad return on his investment!

The 3d printed “homemade” ones look better. Lol

 

[kpecks]

Have to have a small printer farm.

I'm making some Valentine's and Easter stuff for my wife to sell in her craft shop space (she does mostly sublimation printing on purchased products) and it just takes so long to print quality hi-res stuff and a decent enough printer. Mine's "only" an Ender 5 Plus (go big or go home), but the prints on it have been really great, especially for my beginner status.

Found an .stl file on thingiverse.com for the bed stake covers..

I have my topper on so im not going to waste my time printing them but someone should test these!

https://www.thingiverse.com/thing:4863875

 

[Brutal_HO]

Got it. Might be a while before they come up in the print queue. ;-)

 

[Lumpskie]

Brought truck home on Monday. Tuesday I had Mickey Thompson Baja Boss AT's (285/65/20R) put on and also a Truxedo Sentry tonneau cover installed.

How do you like those tires? Have you had the in any weather yet? My set should arrive today...

 

[cmr287]

Got some weather tech wind deflectors & mid flaps installed from Xmas, and currently working a 29 LTD CB mounting project for my Laramie, DRW, CC.

I’ll post the thread here for folks to check out.

•••• Follow the thread below for updates and progress.

3500 Ram Laramie 29 LTD Classic help
https://r.tapatalk.com/shareLink/to...assic-help.7908/&share_type=t&link_source=app

Respectfully
Chris


Sent from my iPhone using Tapatalk

 

[jadmt]

ditched the air dam in favor of the CJC intercooler guard. Yes i know I don't have an intercooler lol. my reason was hated the way the plastic air dam looks and wanted to keep slush etc off the winch line.

 

[Thedaran]

Installed AVS bug deflector
Also first oil change, love the positioning of the oil filter

 

[Linked4door]

Finished putting together the parts for my bypass kit I built today. Just need to install it after work. Couldn't find anyone that made any brackets for the 22's , so I had to make one. Not my best fab work, but it will do the trick of holding the filter.