2022 Ram HD Builds and orders - Post and discuss your TRUCK order here! ** NEW USERS READ POST #1 **

[b307a1]

*Offered this year.

I was told by two dealers that it isn't possible to order Olive green anymore. Which was disappointing. I had to settle for Dominico red when I ordered my Power Wagon.

That's too bad. The order restrictions keep piling up.

 

[MarcG]

So I was wondering, would Sandi keep me update as my order moves to different codes or will I needed to message her? I know she's busy and don't want to annoy her.

From what I can tell, she usually asks people to check with her every few week (3 weeks?) until it gets close.

From how busy she seems...she is remarkably responsive.

If you need a status in between...ramchat can do that but your results may vary and likely depends on who you get...my interactions have been useful.

 

[Royalist_Ram]

*Offered this year.

I was told by two dealers that it isn't possible to order Olive green anymore. Which was disappointing. I had to settle for Dominico red when I ordered my Power Wagon.

Yeah it showed on the order system Thursday that ya can’t at least for Laramie and up.

 

[tolym]

So I was wondering, would Sandi keep me update as my order moves to different codes or will I needed to message her? I know she's busy and don't want to annoy her.

She usually recommends getting back to her every few weeks. I’d leave her alone for at least a month and bug the hell out of RamChat but you’re better of just guessing what status your truck is then relying on RamChat.


Sent from my iPhone using Tapatalk

 

[tnpete]

She usually recommends getting back to her every few weeks. I’d leave her alone for at least a month and bug the hell out of RamChat but you’re better of just guessing what status your truck is then relying on RamChat.


Sent from my iPhone using Tapatalk

I agree she told me to check back in a month. So set it on my phone to do that. I figure that lady is so busy. I don't need to bother her, plus when mines in. I will go down pay them cash, then drive it back 600 miles.

 

[tla90]

So I was wondering, would Sandi keep me update as my order moves to different codes or will I needed to message her? I know she's busy and don't want to annoy her.

I just waited for cryptostickers to email me the build sheet/window sticker before asking her. Figured she'd be super busy, and didn't want to add something else to her list when I knew what the answer would be. She isn't the one turning wrenches in Mexico. If it is built, it'll be on cryptostickers. If it isn't, it won't

 

[Mega700]

Ordered a 2022 Laramie megacab w Cummins, sunroof, rambox, 8.4 screen, night edition first week of July. Level kit is in along w 35” falken tires. Holding off on ordering tonneau as there is only a 30 day return. Thinking MX4 backflip. Was told this week build date is scheduled for 10/18.

 

[beckty85]

Ordered a 2022 Laramie megacab w Cummins, sunroof, rambox, 8.4 screen, night edition first week of July. Level kit is in along w 35” falken tires. Holding off on ordering tonneau as there is only a 30 day return. Thinking MX4 backflip. Was told this week build date is scheduled for 10/18.

I’m scheduled for that day as well. Laramie mc Cummins.

Mx4 is sitting in the garage already

 

[Mega700]

I’m scheduled for that day as well. Laramie mc Cummins.

Mx4 is sitting in the garage already

First tonneau for me. I liked the fact you could open close tailgate with tonneau closed, and fold it against back window. Rolling ones looked cool but we get a lot of ice and snow.

 

[beckty85]

First tonneau for me. I liked the fact you could open close tailgate with tonneau closed, and fold it against back window. Rolling ones looked cool but we get a lot of ice and snow.

This will be my second mx4. Almost went retrax this time but you give up too much bed IMO

 

[tnpete]

I just waited for cryptostickers to email me the build sheet/window sticker before asking her. Figured she'd be super busy, and didn't want to add something else to her list when I knew what the answer would be. She isn't the one turning wrenches in Mexico. If it is built, it'll be on cryptostickers. If it isn't, it won't

When in the build will it allow you to enter your Vin into the Cryptonsticker?

 

[iflyskyhigh]

This will be my second mx4. Almost went retrax this time but you give up too much bed IMO

Have an MX4 on my F150. Held up great in the desert heat. Easy to install and take off by yourself if need be. Can use 99.9% of the bed with it folded against back window. Supports several hundred pounds. They run a sale around Black Friday every year if you can wait. Like 10% off I think? That’s what I’m waiting for.

 

[tla90]

When in the build will it allow you to enter your Vin into the Cryptonsticker?

You can put in your VIN now, and it'll email you when the build sheet populates. I think it's called "Track a VIN" or something. The build sheet comes before the window sticker.


I'm about to start ordering stuff next week. How easy is the MX4 to put on and take off? I'll only need a bed cover when I'm bringing the tons of stuff that goes along with a baby. Don't want to have to fight with it for two hours every time

 

[MarcG]

When in the build will it allow you to enter your Vin into the Cryptonsticker?

You can enter it once you have a vin.

 

[iflyskyhigh]

You can put in your VIN now, and it'll email you when the build sheet populates. I think it's called "Track a VIN" or something. The build sheet comes before the window sticker.


I'm about to start ordering stuff next week. How easy is the MX4 to put on and take off? I'll only need a bed cover when I'm bringing the tons of stuff that goes along with a baby. Don't want to have to fight with it for two hours every time

Very easy.

First install you have to install the rails which takes maybe 1/2 hour. Basic tools.

Then you can take the cover on and off without any tools. It’s surprisingly light for as sturdy as it is.

I’ve also never had a leak. If you have stuff that needs to stay dry this will do the job.

 

[leeparnell89]

“You are safe with the pricing. As a sold order your price and incentive is from the date of order. “

In an email. Screw it, I’ll wait for it. Safety group on the tradesman sounds worth it.

I would hold out for it. Tried to order safety group on my tradesman yesterday and they’re no longer allowing it on new orders.


Sent from my iPhone using Tapatalk

 

[beckty85]

Have an MX4 on my F150. Held up great in the desert heat. Easy to install and take off by yourself if need be. Can use 99.9% of the bed with it folded against back window. Supports several hundred pounds. They run a sale around Black Friday every year if you can wait. Like 10% off I think? That’s what I’m waiting for.

If you just message the people at realtruck.com they will give you a discount.

 

[Spkenney]

Any of you considering debadging your new truck. I like a nice clean look without decals. I am also considering taking off the Laramie badge because of the way it looks. For sure will pull dealer badging if they put it on.

 

[lovmoney69]

I just waited for cryptostickers to email me the build sheet/window sticker before asking her. Figured she'd be super busy, and didn't want to add something else to her list when I knew what the answer would be. She isn't the one turning wrenches in Mexico. If it is built, it'll be on cryptostickers. If it isn't, it won't

How do I get cryptostickers to put me on the email list? I'm supposedly in D1.

 

[Linked4door]

Any of you considering debadging your new truck. I like a nice clean look without decals. I am also considering taking off the Laramie badge because of the way it looks. For sure will pull dealer badging if they put it on.

I know I am. Did the same to my 2019 the first week after I got it.