What's new
By:
Ram Heavy Duty Forum

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Where is everyone mounting their CB/Ham mics?

Xflight29 said:
Nope, just fit in with no modifications I went with a easy bend coax with a rugged radio .5 antenna. I have reach out about 35 miles with Sitcom and can easily reach a Repeater about 40 miles away.
Click to expand...
How are you running power to it?
 
I have the AUX switches and hooked up to the in cab line that comes with the AUX switches and have it hooked up to AUX #6 ran it up between the front dash panel and tied it in to the trough cab power.
 
if you look up dash cam in the forms they have a great write up on the through cab cable for power.
 
Xflight29 said:
I have the AUX switches and hooked up to the in cab line that comes with the AUX switches and have it hooked up to AUX #6 ran it up between the front dash panel and tied it in to the trough cab power.
Click to expand...
Ah. Have mine snaked through the back of the dash through the firewall and direct power from the battery. Trying to get a drill in that cubby I have up on so said meh. I have the AUX switch panel but rather hard wire and couldn’t understand the wiring lay out. I wish RAM did a better job in explaining all of that.
 
I here you, got a lot of help from staff members and other members on how to do it. Once you understand it is super easy. I wanted to go with the AUX switch so I don't forget its on.
 
Xflight29 said:
I here you, got a lot of help from staff members and other members on how to do it. Once you understand it is super easy. I wanted to go with the AUX switch so I don't forget its on.
Click to expand...
All my radio guys were like hard wire the radios since the switch and route can cause interference and such. I love this radio tho!
 
NomadPNW said:
Thought I would toss an update :) Got it all handled with the help of Bulletproof Mounting Solutions and some modding, tossed the main unit in my glovebox. Other arm is for a phone or GoPro clip. Rock solid mounting!
Click to expand...

Is that center top base plate Bulletproof or DIY?

I used one from RAM mounts that I had to chop down and drill new holes in but it's only a single center post.
 
NomadPNW said:
It’s a base plate that mounts to the factory screw holes. Took about 15 seconds to do :)
Click to expand...

Thanks.

I swear I looked at Bulletproof when I got the RAM mount and they didn't have them for the new Rams yet.

I also see they are 20mm and all my RAM mount stuff is 1" so maybe they had them and I passed for that reason. Didn't want to buy adapters.
 
Brutal_HO said:
Thanks.

I swear I looked at Bulletproof when I got the RAM mount and they didn't have them for the new Rams yet.

I also see they are 20mm and all my RAM mount stuff is 1" so maybe they had them and I passed for that reason. Didn't want to buy adapters.
Click to expand...
Yeah they have 17mm and 20mm, what do you use for RAM Mount stuff? These guys have a lot of things now. Might be worth looking back into them.
 
NomadPNW said:
Yeah they have 17mm and 20mm, what do you use for RAM Mount stuff? These guys have a lot of things now. Might be worth looking back into them.
Click to expand...

I had a bunch of 1" RAM mount stuff from my 04.5. Posts, arms, etc. for Phone, Edge Display, CB mic, Bluetooth control pod. Don't need all that now, just my phone and eventually I'll get my 75WX/ST and amp reinstalled and try to also find a spot for a small GMRS radio I already have but never installed. I wouldn't mind putting the GMRS radio overhead since there's no sunroof.

I can always put on a splitter or bolt more 1" ball mounts to the plate I used. I'm not going to spend more $$ for stuff I basically already have.

I just prefer to use plug and play of possible and had to mod this RAM mount to fit.

1606028170876.png
 
You must log in or register to reply here.
Back
Top