Utility Bed Rails Kit for Power Wagon

[jasrho]

I have a 2024 PW (without the ram boxes) and I want more tie down spots in the back other than just the 4 corners. I have the bed utility group but I am surprised it did not come with more tie downs. So I just have the 4 in the corners at the bottom and then above those there are cleats.
I would want something like this: https://www.allmoparparts.com/sku/82215286ab.html

But it seems that is only for the 1500. I don't care if its an aftermarket solution either but want it to fit up close to the side of the bed as possible and not stick out too far. Any ideas?

Thanks for the help!

 

[jsalbre]

I have a 2024 PW (without the ram boxes) and I want more tie down spots in the back other than just the 4 corners. I have the bed utility group but I am surprised it did not come with more tie downs. So I just have the 4 in the corners at the bottom and then above those there are cleats.
I would want something like this: https://www.allmoparparts.com/sku/82215286ab.html

But it seems that is only for the 1500. I don't care if its an aftermarket solution either but want it to fit up close to the side of the bed as possible and not stick out too far. Any ideas?

Thanks for the help!

I removed the 4 tie down points and used the bolt holes to attach a frame I built out of unistrut. Lots of tie down points now!

 

[HarryN]

I removed the 4 tie down points and used the bolt holes to scratch a frame I built out of unistrut. Lots of tie down points now!

View attachment 85702

Yes, something like that, or use 15 series 8020 or etrack type material.

15 series is roughly 2 x 2s wood in size.

 

[SolidAxleorBust]

Its a crime that these trucks do not come with better tie downs.

 

[Soapy]

I use Putco above the bed rail system that works with most bed covers. They bolt in using existing stake pockets with stainless steel brackets. They have T slots on top and you can add tie downs or various height load rails. No drill installation.

 

[Rockcrawlindude]

I use Putco above the bed rail system that works with most bed covers. They bolt in using existing stake pockets with stainless steel brackets. They have T slots on top and you can add tie downs or various height load rails. No drill installation.View attachment 85764

Nice rocks