Ultra Gauge - EGT

[K7PWZ]

Tried to search these forums but didn't see anything.
I use an Ultra Gauge in our Toyota Sequoia (been using it-them since 2012) but trying to figure out if it'll read EGT on our 2500 but not finding anything (Example, for the Sequoia I found a code list and was able to "program" the UG to display torque converter & pan temp for the transmission, but haven't had any luck finding stuff for the 2500)
Looking for suggestions on monitoring EGT when were towing our 5th wheel.
Thanks.

 

[Dodgeman]

I’m not familiar with the Ultra Gauge. We have an OBDLink MX+. The included software lets us monitor all five EGT Temp sensors plus many more things on our smartphone. I use it all the time, both when towing our 5er and general driving. Plus, it will interface with AlphaOBD or Jscan if you go that way.

 

[K7PWZ]

According to the Ultra Gauge website, there's a possibility of it reading the EGT, however the CAN bus equations will need to be entered into the gauge so it can properly display those values.
Anyone know of the math - code for the can bus - EGT info?