Shark Fin antenna moves around a little bit after replacement

[RAMBOW]

Had the infamous error on the 12 in system and dealer replace the shark fin. It did have some corrosion on the contacts. After replacement all is well but, the antenna moves just slightly if you grab it and from the picture I found on the internet the gasket and wires mount in the middle of the antenna body so it seems as if this could be normal. Anybody experience this slight wiggle (less than 1/32 inch)? Unfortunately I didn't try to wiggle the old one so I don't even know if this is a new issue.

 

[Nick]

I have had 2 Rams and neither has moved . Just go down to a dealer and check a few out for movement . I don't think they should move .

 

[oppizzippo]

I think mine has a tiny amount of wiggle. It's so big you can actually get a grip on it.

 

[RAMBOW]

My baby is going in next Tuesday to check things out, thanks for the feedback. BTW, took her out on a rather very back country road that had about 10 miles of WOW, I made it, and it proved itself to be very capable for off road use. High on life and enjoying 4X4ing.