First day of driving and the bathroom and food stops were fine. Got in the truck this morning and the seat was all the way back and mirrors were not where I set them. I thought someone had got into the truck. Also the radio was not on where I left it. What’s happening here?
Ram Heavy Duty Forum
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Seats and mirrors changed overnight?
- Thread starter joeycamp
- Start date
IndyRamMega
Well-Known Member
- Messages
- 596
- Reaction score
- 932
- Points
- 93
you have the easy exit feature on....or did you use the other key fob?
Last edited:
It only did it one time. Like mentioned above maybe i may have hit the button on the way out. When I started it it didn’t go back closer. If I had the easy out feature I would like to know how to set it. I’m short and have the sit up pretty far and have the seat come back some would be nice. The adjustable pedals are nice and keeps me back some.
ClawSS
Well-Known Member
Maybe you grabbed the wrong FOB?
It was fine this morning. I must have hit the button on the way out the other morning. They are very close to the handle
I haven’t programmed any fob yet. If that makes a difference. Also I’m keeping both in my pocket. Don’t know if this affects anything. Keeping my luggage in the bed and afraid to keep other fob in there thinking it would keep tailgate unlocked. Still learning all this.
ClawSS
Well-Known Member
I may be off base, but that never stopped anyone else from posting....
I think that if you have programmed the seats/pedals, and hit the set button and then a number selection....doesn't that automatically mate it to the FOB that was used to go to ACC or RUN.
I think that if you have programmed the seats/pedals, and hit the set button and then a number selection....doesn't that automatically mate it to the FOB that was used to go to ACC or RUN.
Should be two separate functions. Basically the same but when programming the FOB after you press the set button you need to press the unlock on the FOB within 10 seconds. You unlink it the same way.
Edit: p36 of the user manual for '22
Page 40 of the user manual that you can download from your mopar page.
