Rear seat removal 2021 Crew cab 3500

[Jeff1759]

Anyone have any useful links on how to do this. Would like to read/watch it done before I dig in.
Want to remove the 60% rear passenger side.

 

[jadmt]

my buddy removed his and it was straight forward. He removed both on his 2020 2500 CC.

 

[Crusty old shellback]

it's very simple. 4 bolts and lift it up off the hooks on the back wall and pull it out.

There are some pictures in my build thread from where I removed mine and modified the back hooks so I can lay them down flat. I.E. back seat mod for RAM HD

 

[Jeff1759]

Great, thanks guys!

 

[GPurcell01]

Word from experience: have a second set of hands for taking the seat out. The 60% side is heavier than you'd think! I managed it by myself without scuffing anything but would have loved some help.

 

[Crusty old shellback]

I got mine out by myself as well. Just a little bit of a pain.

 

[Jeff1759]

Same experience here. Pretty straight forward, but carrying it in the house was a pain!
Got out the scale and weighed myself, then me with the 60%
Couldn't stand there with it long enough for the scale to lock in but it looked like around 73, awkward pounds
[edit] I was surprised to find out I had a sub woofer back there!

 

[Mtndogboy]

it's very simple. 4 bolts and lift it up off the hooks on the back wall and pull it out.

There are some pictures in my build thread from where I removed mine and modified the back hooks so I can lay them down flat. I.E. back seat mod for RAM HD

I am having trouble finding this in your build thread. Lots of cool stuff. I am concerned that my Tradesman with base seats which fold up instead of flat may be more of an issue.

 

[elephantrider]

it's not any different. 4 bolts. lift up and off the rear hooks.

 

[Crusty old shellback]

I am having trouble finding this in your build thread. Lots of cool stuff. I am concerned that my Tradesman with base seats which fold up instead of flat may be more of an issue.

Starts around the bottom of page 3. Right after the mounts for the radio. There is also a youtube link in there by another member.