What's new
By:
Ram Heavy Duty Forum

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Rambox dividers

Pronto

Pronto

Well-Known Member
Messages
543
Reaction score
587
Points
93
Location
Texas
I can't find the Mopar kit for dividers that go in your Rambox. Does anybody know if they make one for the current gen? I can find one for the 4th Gen, did the Rambox change on the 4.5 gen?
 
I made a templet out of cardboard and went down to HD and bought a piece of 3/8 plastic sheet and made my own. much cheaper than what you find on Amazon.
 
I may have to do that but I don't really want another project right now. If I did it, I was thinking about making them out of black starboard. Does 3/8 give a snug fit? How many templates did you have to make?
 
Pronto said:
I may have to do that but I don't really want another project right now. If I did it, I was thinking about making them out of black starboard. Does 3/8 give a snug fit? How many templates did you have to make?
Click to expand...
Made two, one low and one high . the 3/8 fit a bit snug so I used a file to just thin-it out a bit. Worked great.
 
H3LZSN1P3R said:
Seriously i dont understand why they are not included with the ram boxes lol
Click to expand...
I asked the dealer sales manager this same question and he told me we could negotiate the price of them. they would have to incurred a cost in installing them. I was a little taken back by this.
 
H3LZSN1P3R said:
Seriously i dont understand why they are not included with the ram boxes lol
Click to expand...
Yeah, it's ridiculous. I'm surprised they haven't been undercut by aftermarket providers.
 
Mopar part 82212966

They work well but you have to slightly Dremel out a little radius on the top of one of the inserts on each side as it slightly contacts the latch cover plastic.
 
@JC said:
Mopar part 82212966

They work well but you have to slightly Dremel out a little radius on the top of one of the inserts on each side as it slightly contacts the latch cover plastic.
Click to expand...

Thanks for the part number, I couldn't find any reason why that part number wouldn't work on the newer trucks. They do make you bend over when you order them.
 
You must log in or register to reply here.
Back
Top