Power Wagon Flares on Limited?

[mikenacarato]

I was in a minor accident with my 22 3500 Limited and have decided to replace my damaged bumper with the AEV front bumper. I wanted to add some black accent to the side of the truck but don't need their giant fender flares. Will the power wagon flares work on a non-power wagon? I wouldn't see why not but I figured I would ask before I went buying parts.
Thanks!

 

[UglyViking]

I was in a minor accident with my 22 3500 Limited and have decided to replace my damaged bumper with the AEV front bumper. I wanted to add some black accent to the side of the truck but don't need their giant fender flares. Will the power wagon flares work on a non-power wagon? I wouldn't see why not but I figured I would ask before I went buying parts.
Thanks!

Without having knowledge for 100% confirmation, I'd wager a guess they are the exact same mount. They seem to be ever so slightly wider than the "sport" flares, but I'd guess they use the exact mounting holes. It would be pretty crazy for RAM to design 2 different mounting options for functionally the same vehicle because not only would that affect the flares, but also the bedside and fender that is needed in place of an accident. You could probably look up part numbers of the front fender to confirm it's the same part number.

 

[Crusty old shellback]

There are a few threads on here about it. I beleive you have to drill holes in your fenders to mount them.

 

[G Mcpherson]

They do make an off road flare that uses the factory screw location. They are a Pocket flare though.

 

[UglyViking]

There are a few threads on here about it. I beleive you have to drill holes in your fenders to mount them.

OP has a limited, sport flares come on everything Laramie and up I believe, so assuming he already has sport flares is assume they would work? Unless you're saying they are different holes?

 

[Crusty old shellback]

From my understanding, the PW flares mount differently and have extra holes in the fender. I just don't know where the thread is on here that describes it and possibly has pictures of it.

I know when I tried to remove mine for repairing damage, just taking off the visible bolts didn't work. So I didn't go farther.

 

[UglyViking]

Here is a post showing the holes in the Power Wagon fender after flare removal (link). There seems to be two part numbers for the front right fender 68360830AB and 68360832AB. In standard mopar fashion, both fenders are listed as fitting every trim. Sadly, both fender part numbers also display for the PW, so considering that all PWs come with flares, that doesn't tell us much.

I'm struggling to think about what would be different beyond the holes for the two versions. Perhaps roll the dice or visit the local Ram dealer and see if they have more info?

 

[Crusty old shellback]

Found one I started as well.

PW wheel flares

So I got a bunch of construction adhesive all over the drivers side of my truck. Tried getting it off the plastic wheel flares and trim but it's being a pain and leaving marks. So am looking at replacing the noticeable ones, like the wheel flares. I unbolted them but they still will not come...

hdrams.com