Passenger lean

[Obxram]

2019 2500 cc short bed 6.4. I noticed the bed looked a little crooked so I checked the measurement from the ground to the top of the wheel well same place both sides. It’s off an inch shorter on the drivers side.
Normal or need to be checked?

 

[Brutal_HO]

2019 2500 cc short bed 6.4. I noticed the bed looked a little crooked so I checked the measurement from the ground to the top of the wheel well same place both sides. It’s off an inch shorter on the drivers side.
Normal or need to be checked?

Have it checked. My bed and cab were BADLY misaligned L/R and both required adjustment. I still think the pass side is a little low as well and so does my crossover toolbox (looks twisted).

 

[Squatch]

Also check your caster with the cam bolts on the axle end of your radius arms. Mine were way off! It made my truck lean to one side and handled like ****. Once I got those lined up the truck didn’t lean, the steering was far more responsive and the steering self corrected back to center when coming out of turns a whole lot better.