What's new
Ram Heavy Duty Forum

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Measurement with 37” tires

Mathnerd

New Member
Messages
7
Reaction score
4
Points
3
Can someone running 37’s take a measurement for me?
I am looking for the height from the ground to the bottom of the door opening.

I am trying to determine what i will need to do for my rather un-tall wife to make it easier for her to get in and out.

Thanks!
 
Trucks all ride at different heights so this may not get you all that close. If you take the actual diameter of the 37s you like (most are around 36"), subtract the height of the tires you've got now, and divide by 2 you'll be pretty close.
 
Trucks all ride at different heights so this may not get you all that close. If you take the actual diameter of the 37s you like (most are around 36"), subtract the height of the tires you've got now, and divide by 2 you'll be pretty close.
I don’t have the truck yet. I can expect to be within a few inches unless someone chimes in with a truck that is radically lifted.
Im trying to plan right now for the upgrades and mods i anticipate wanting/needing.
The plan is 1.5” Thuren coils in front, stock height Thuren in back with Fox 2.0 all around.
 
ALL THUREN…. 2020 Ram 3500 HO Mega 4x4, 2.25 coils, Thuren valved king 2.0’s, Thuren track bar, Thuren High Angle sway bar, Thuren alien radius arms, Fox ATS steering stabilizer, DOR steering box support. Airlift load lifter 7500xl rear bags with 7400EZ wireless air system, 37/12.5 stock 20’s BFG KM3’s!!!



Image.png


I measured from floor to bottom of outside door sill edge & your at 23”…. 25” to interior sill plate.. And the electric steps are a must for 5'0" lady friends...
 
Last edited:
I don’t have the truck yet. I can expect to be within a few inches unless someone chimes in with a truck that is radically lifted.
Im trying to plan right now for the upgrades and mods i anticipate wanting/needing.
The plan is 1.5” Thuren coils in front, stock height Thuren in back with Fox 2.0 all around.
Gotcha, I can measure mine tomorrow.
 
Thanks ironmike, that is exactly what i am looking for.
Beautiful truck by the way, I’m not usually a fan of red but your’s could change my mind.
 
Thanks ironmike, that is exactly what i am looking for.
Beautiful truck by the way, I’m not usually a fan of red but your’s could change my mind.
Thank you, thank you... Get the red!!!!!! There are few that look really nice! I think it's the red/black Zero chrome that does it....
 
It was a must to have a minimum drop step height of whatever the OEM power steps were. My wife tried to get into a stock PW without any steps and failed. My guess is that truck was roughly equal to my now Thuren leveled Mega.

edit:/ And remember there could be a pencil skirt involved if the truck is used as a "towner", so hiking that leg up may not be an option.
 
It was a must to have a minimum drop step height of whatever the OEM power steps were. My wife tried to get into a stock PW without any steps and failed. My guess is that truck was roughly equal to my now Thuren leveled Mega.

edit:/ And remember there could be a pencil skirt involved if the truck is used as a "towner", so hiking that leg up may not be an option.
My wife is 5’3” on her best day. We test drove a ‘23 Power Wagon and it was pretty entertaining for the salesman watching her struggle and me hoisting her up.
 
Back
Top