Infotaiment.com Wireless charger installation

[nomorefords]

I apologize if this has been answered elsewhere, but I couldn't find anything that would help me with this. I am trying to install the center console with wireless charging in my 3500 Bighorn. I got the kit from infotainment.com and for the most part everything seems pretty straightforward, except for the step where I need to connect the linbus to the E connector in the BCM. I can see the connector above the brake pedals, and have direct line of sight if I pop out the headlight controls on the left side of the steering wheel, but there is no way to actually reach the connector unless your arms are pencil thin and super long. I can try to post a picture later when I get home.

Its the step starting at 6:30 in this video:

They "conveniently" did this step on a table top without showing how to access the actual BCM

 

[Jimmy07]

Remove the amplifier. Disconnect all 7 connectors that are plugged into the BCM, and pry out the Christmas tree zip tie that attaches the wire loom to the center of the BCM.
Doing this will give you the best chances of being able to free up enough slack to use 2 hands to work with on that connector.