Discoveries In the Aftermarket

[jakebrake]

I've stated here the other day that I lost my 2018 3500 MC in a accident. Now I'm waiting for a 19 to come in next month I hope.

I pulled a few items off of my 18 hoping some of them can be fitted back on the 19. This is what I have discovered:

1. WeatherTech does not have a part # for their floor liners. If the front floor changes on the 19, I would think the rear floor on the MC would be the same. Money saved.

2. WeatherTech does not have a part # for the 19 window vent shades. Hoping the door or window did not change. Don't know??

3. WeatherTech doesn't have a part # for their hard plastic mud guards. ( that part of the truck doesn't look like it's changed to me )

4. AMP Research's rear bumper step seems to have changed, according to their guy on the phone. A difference in the frame. I can see that. ( will wait and check for myself )

5. The Fomoto oil drain valve does not show a part # for the 19, but for the life of me, I can't see that changing on the 6.7.

Anything you can add, feel free.

 

[Daybreak]

Howdy,

WeatherTech window visors here https://hdrams.com/forum/index.php?threads/window-visors.290/#post-3823

Confirmed fitment with 2019 2500 Crew Cab Limited.

WeatherTech needs to get it together. I would say they are losing business by not having proper fitment for the 2019 Ram HD listed.

 

[Mikethebikeman]

I just installed the 2018 Weathertech vent visors & mud flaps on my truck yesterday & can confirm they fit. The window channels did not change, so exact fit for the visors. As for the fender flares, they did change a bit from the 2018s. The fender flares now have a little ridge that sticks out toward the bottom (compared to a rounded surface on the 2018s), so the fit is not exact, but close. On the fronts, I had to drill a hole in the flap for the top bolt, as it was about an inch off from the upper hole in the flap. For the rears (dually), the bolts matched up perfectly, but still had the flare ridge issue. They added the plastic rock chip guards on the bottom on the 2019s, so that needs to be removed (just a screw & plastic push clips). Once removed, they do take up a little bit of where the flare used to be, so you'll have a little gap at the bottom. Once I mounted up the flaps, they look pretty good, but not an exact fit around the flare. I'm still happy & keeping them.