crash detection system fail/cruise control stop working after windshield replacement

[dpfreeman13]

OK, hello people. I recently bought a 2020 power wagon. It has a 2 inch Carli backcountry lift with 37's. It had a cracked windshield. Every thing worked before I got the windshield replaced. After the windshield got replaced with an OEM windshield the place couldn't calibrate it, and they gave it back to me with the crash detection and cruise control warning lights on. They stated it was due to the lift that they couldn't calibrate it and I needed to take it the dealership. So I did. They have had it for a week. They state that they tried to calibrate it and it will only hold the calibration for a little while then resorts back to the warning lights coming back on. They took the camera apart and said it is working. They contacted the engineers at Ram and they gave them the low down along with all the data from the computer in the truck. They are now saying that Ram is suggesting to remove the lift and set the truck back to stock height and try recalibrating then. At my dime of course.
Has anybody had this issue or have any ideas.

Thanks.

 

[devin37s]

OK, hello people. I recently bought a 2020 power wagon. It has a 2 inch Carli backcountry lift with 37's. It had a cracked windshield. Every thing worked before I got the windshield replaced. After the windshield got replaced with an OEM windshield the place couldn't calibrate it, and they gave it back to me with the crash detection and cruise control warning lights on. They stated it was due to the lift that they couldn't calibrate it and I needed to take it the dealership. So I did. They have had it for a week. They state that they tried to calibrate it and it will only hold the calibration for a little while then resorts back to the warning lights coming back on. They took the camera apart and said it is working. They contacted the engineers at Ram and they gave them the low down along with all the data from the computer in the truck. They are now saying that Ram is suggesting to remove the lift and set the truck back to stock height and try recalibrating then. At my dime of course.
Has anybody had this issue or have any ideas.

Thanks.

Any news?

 

[CdnHO]

I had the windshield replaced with OEM and the lane keeping feature didn't work after that. The glass place did several calibrations, three dealer visits and still not working. What a pain for some stone chips that the glass place said required windshield replacement. Currently out of the country for six months so will pick up where we left off when I return.