2500 Commerical Setting Pin with AlfaOBD

[BattleBear]

So I added a grill with marker lights and have them connected to the AUX1 slot. I want to change the settings so they go on and off with the headlights. I also want to change some other settings. The code is not 0000, 1234, 4321, 2018, 2500, or any combination of the VIN

I have AlfaOBD and OBDlink MX+ , just trying to figure out which settings I have to go under.

 

[AH64ID]

Default is 0000, are you the original owner?

 

[BattleBear]

Default is 0000, are you the original owner?

I am not. I tried calling the dealership, the previous owner, Chrysler Customer Care, and the closest Ram Dealership

 

[H3LZSN1P3R]

It will need to be reset or believe you can get it from alfaOBD @Jimmy07 would know.


You cant have the lights go on and off with the headlights through the Aux switch system unless you have a relay triggered off of the light circuit

 

[AH64ID]

It will need to be reset or believe you can get it from alfaOBD @Jimmy07 would know.

I believe I’ve seen that option, just can’t recall where in AlfaOBD.

You cant have the lights go on and off with the headlights through the Aux switch system unless you have a relay triggered off of the light circuit

Correct, no option for the aux switches to be tied to the headlights.

 

[superjoe83]

Connect to the instrument panel, it's under program customer features
Fleet Pin Reset