2025 Limited Longhorn Aux question.

[Xflight29]

My 2020 I needed to jump two ports to have pass-through power to cab. Question, seeing that there are only 4 ports compared to the previous 6 on my 2020 do I need to still jump 2 ports to have in cab power? I was hoping they symbolized all this with the 2025 model year.

 

[AH64ID]

The aux switch wiring diagrams haven’t hit the body builders website yet.

Any wiring diagrams in the package with the wiring?

 

[Xflight29]

The aux switch wiring diagrams haven’t hit the body builders website yet.

Any wiring diagrams in the package with the wiring?

Same as the previous years. with only 4 switches I was hoping they might have made it simpler to have Aux cab power.

 

[jsalbre]

Odds are the wiring is pretty much the same. If you open up the PDC what do you have in there?

 

[Xflight29]

Odds are the wiring is pretty much the same. If you open up the PDC what do you have in there?

The same wire harness and loose wires as I had in my 2020.

 

[jsalbre]

If it’s the same then you should only need to connect the one internal connector (the grey one I believe) to have ignition power inside, you just have to cut/tap the wire that currently loops back to that connector and then heads to the rear.