2022 5500 Rear Parking Sensors/Module/Harness

[IFlyEm]

Hey guys,
I pulled the flatbed off my 2022 5500 and I see the wire harness has a plug in for the rear parking sensors.
Does anyone have the part numbers for:

1. Rear Parking Sensor Module
2. Connecting wires for the sensors
3. The rear parking sensors

Thank you!

@Jimmy07 Maybe you can help again?

 

[gprguy]

Let's see if I can attach a PDF here. This should have everything you need - if not let me know, I haven't installed the sensors on mine yet so I still have everything in a box and can grab numbers off of them.

 

[IFlyEm]

Awesome, thanks! Do you know where the module get wired into?

Also what are the coupons for? Those things are pricey if you can even find them.

Did your truck come with the ParkSense buttons above the Upfitter switches?

 

[gprguy]

No problem. I don't remember a module at the back of the frame on mine. There is one for the trailer TPMS, but not park sense that I remember. Just a plug, but I can double check tomorrow.

The coupons are just metal templates for the weird shape needed to fit the sensors. I suppose if you wanted you could weld them in to a bumper or something, but I plan on just using them to trace the hole to cut. There's some info on page 6 of that PDF. I would imagine that up fitters in a hurry just hole saw out a slightly oversized round hole and then weld the coupon in from the back to slightly countersink the sensor and save a bunch of effort.

Mine did come with the buttons - it has the front park sense enabled from the factory, and the rear is ready but disabled till I install the sensors.

 

[IFlyEm]

I have the plug at the back of the chassis with a large Parking Sensors label. But I don't have the buttons.

 

[gprguy]

Ah ok. So from my research there are only a few rear half chassis wiring harnesses for the chassis cabs - mostly to do with what fuel tank configuration you have and if you have the surround cameras or not. That plug may be there on all chassis cab trucks regardless of park sense or not. If you need the rest of the system installed I don't know if we have a guide on the forum or not. I did find a guide for adding front sensors which may be of some help, but for that guide it assumes you already have the rear system in place.

Thread '[UPDATED] Adding Front ParkSense on a Tradesman'

May 29, 2021

[UPDATE] Install complete, see post #6 for further details.

My 2020 3500 Tradesman came with rear parking sensors, but not the front.

I'd like to add the front sensors to my truck. I'm trying to narrow down the parts I would need and the parts' websites are too vague to completely rely on. Since I have rear ParkSense, would the front sensors use this same module - or would I need to add one specific to the front sensors? Assuming I would need a separate module, are these the parts that I would need:

• Instrument Panel Switch -----(p/n ...

• 01Time
• Replies: 36
• Forum: Modifications and Accessories

I don't know if the mid or front parts of the chassis harness always have the park sense connections populated or not - common sense says yes, but Ram does weird things frequently.