2" Lift kit....Not Leveling Kit

[Burn'n Oil]

I like this idea except, its still well over $1500 installed. All I want to do is clear 35's and maintain a TRUCK stance.

What, if I may, is a "TRUCK stance?"

 

[Sharkbite]

I like this idea except, its still well over $1500 installed. All I want to do is clear 35's and maintain a TRUCK stance.

I have 35's on a stock suspension with nothing but 18x9 wheels with +20 offset. Had the same set up on my 2017.
No rubbing on road, off road or towing 14k equipment trailer every week. The tires are 285/75/18 so the width is about 3/4 - 1 inch narrower than 35/12.50's.
It appears to have more than an inch of clearance at full lock.

 

[rangerdanger]

I have 35's on a stock suspension with nothing but 18x9 wheels with +20 offset. Had the same set up on my 2017.
No rubbing on road, off road or towing 14k equipment trailer every week. The tires are 285/75/18 so the width is about 3/4 - 1 inch narrower than 35/12.50's.
It appears to have more than an inch of clearance at full lock.

Thanks sharkbite. Could you send or post more pics like straight down the side? Id like to see how much they stick out of the fender well. Good Lookin truck you have there!

 

[Marshfly]

Here you go. 1.75” Thuren coils, 1” blocks in the rear. 37x12.50r18s on +18 Methods. It took me 4 hours to install everything in my driveway. A shop is going to charge you for 6-8 hours I’m sure.

Sent from my iPhone using Tapatalk

 

[Marshfly]

From the end.

Sent from my iPhone using Tapatalk

 

[rangerdanger]

shark, no picture came through.

 

[rangerdanger]

Sorry Marshfly, I was asking sharkbite for a end view.

 

[Marshfly]

Sorry Marshfly, I was asking sharkbite for a end view.

His will be half an inch more tucked than that.

But due to no flares it will have the same coverage.

Sent from my iPhone using Tapatalk

 

[rangerdanger]

Are your wheel a +20 offset?

 

[Marshfly]

Are your wheel a +20 offset?

+18.

2 millimeters difference.

 

[rangerdanger]

Gotcha! The wheels I want to put on mine are 18+

 

[Marshfly]

Read this. The 2019+ trucks fit wheels and tires exactly like the 2014+ trucks do.

https://www.thurenfabrication.com/tech/tire-and-wheel-fitment.html

Also, if you do lift, this is the alignment you want.

https://www.thurenfabrication.com/tech/alignment-and-handling.html

 

[Sharkbite]

Thanks sharkbite. Could you send or post more pics like straight down the side? Id like to see how much they stick out of the fender well. Good Lookin truck you have there!

Thanks!

 

[Sawyerd3]

Here you go. 1.75” Thuren coils, 1” blocks in the rear. 37x12.50r18s on +18 Methods. It took me 4 hours to install everything in my driveway. A shop is going to charge you for 6-8 hours I’m sure.

Do you have the air suspension??




Sent from my iPhone using Tapatalk

 

[Marshfly]

No. I looked back and that pic was without the rear blocks. I now have 1” ready lift blocks in the rear.


Sent from my iPhone using Tapatalk

 

[Bob_ag]

Thanks!

Truck looks sharp! What trim level do you have? Did you add the headlamps and fogs?

 

[Sharkbite]

Truck looks sharp! What trim level do you have? Did you add the headlamps and fogs?

Thanks. It is a Tradesman but it had the safety package which included the LEDs for 2019's