2” or 2.5” level???

[Rynofire]

My rake front to back is a 2” difference on my 2022 Ram 2500 Bighorn. I got a 2” kit ready to be installed, but now thinking I should’ve got a 2.5” because it’s been told the spacers don’t lift the same height as they are stated. My 2.5” kit on my 1500 was perfect, but now the 2500 has a different suspension. Opinions on which height?

 

[sstoner911]

I was pretty happy with 2.5 kit from Carli.

It's personal preference more than anything from a looks stand point.

I will say with a 2.5 level kit your rear squat if you're towing will be lower than the front.

I had air bags to level that out..

 

[aaronedmonton]

2” should be the best option, height wise.

 

[MtnRider]

A 2" spacer on a solid axle truck with coils is going to lift the front 2", not sure where you got your info from? 2" will still give you a slight rake, going 2.5" will be very level and almost look slightly nose high to the eye.


.

 

[Surf2snow1]

I ordered the 2.75” kit from Thuren back in June. Just asked them to make it 2” instead. Just in case I have 1500 pounds in the back, I don’t want it to squat lower than the front. Would rather have 0.75” of extra rake.