alfaobd

I have a 2024 Ram 2500. I just swapped out my instrument cluster for an premium digital cluster. Two things I noticed was that 1. The odometer is reading the mileage of the vehicle it came from and 2. The fuel range is not correcting itself.. I tried to connect with a 12+8 cable and correct my...

Wondering if anyone's changed or figured out how to adjust the timer for the WTS for the heater with AlfaOBD? I've done the grid heater delete and switched the factory intake with the Banks intake horn and have noticed the truck seems to run a shorter warm up timer than with factory heater. I...

Hello all. I have a 2023 2500 Limited. I've been trying to do some basic adaptations with AlfaOBD or JScan since I got the truck. Figured out after a bit that I needed a bypass cable, so I purchased one from KaodTech and installed it (plugs in to both white and green CAN). Afterwards, worth...

Does anyone know what all the alfaobd can do with the 2023 ram 5500 HD? I've done DRL, fog lights on all time. What else is there... I can't get the remote start to work and I do have the wire on the truck. Can't figure out the windows up and down either.

I have recently started using alfaobd to fine tune some things, and currently trying to adjust how my DRL lighting works. Currently my research has told me using (CBC features: DRL lamp location - set to - Fog lamp DRL) is rather hit or miss? I did try myself and it just deactivated my low beam...

I have a 2013 Ram 2500 ST Crew Cab 4x4. I just purchased it about a month ago. It only has 34k miles on it. I Live in NM, purchased it online and had it shipped to my folks in WV over the holidays. To my surprise it was fully deleted. Not necessarily a huge concern but there were some issues...

Hey y’all , need help. 1st time using the Alfa obd … After going to program tire size, then changing the tire size I went to ABS connecting to DT MY2019+ power net …then going to ABS initialization. finished doing the checklist starting with the ECU initialization. Completed that procedure...

13 3500 tradesmen, looking for some help with alfaobd, I installed an evic and 8.4 nav from infotainment. Im unable to find cbc settings to add turn by turn, and unable to add splash screen to the evic. Read the forum and tried what was talked about but still nothing on my end.

I mostly post on Cummins forum, but have not had luck getting an answer. So I thought I would try here. Background: Back in April, I installed the bed LED light kit from Mopar. I had read that our trucks are prewired for the bed lights (wrong) and thought I had found the connector on the back...

I just joined this site looking for some info on AlfaOBD, but my truck is a 2018 3500 chassis/cab. If that makes me too old, please accept my apologies and an admin can get rid of this post. I recently purchased the 2018 3500 chassis cab (Regular cab, 60" CA) and intend on constructing a 5th...

Here's a roll-up thread for posting links to any successful DIY Sales code mod and AlfaOBD settings required (or not) and common AlfaOBD settings only mods. This is NOT a How-To or Q&A for AlfaOBD or discussion thread. Links and settings only please. TL;DR If you're not here to contribute, you...