Search results

Today I serviced my truck and I wanted to check my ball joints as it has almost 95k miles on it. I grabbed the tires and shook them and I could feel some movement on both sides in the vertical plane. However, when I had my son shake them there was no movement in the ball joints on either...

Does anyone have a picture of the Matte Black or the smoke version HUSKY LINERS AEROSKIN or II BUG SHIELD on a Black Ram with Paint: PXJ = Black Diamond Crystal?

My older 1990-2000 trucks developed a haze that really limited light output. On my Ram is there anything one can do to keep headlight outer lens from deteriorating and developing a haze that needs to be removed?

I noticed that the grab handle on the driver side of my truck is loose. What’s procedure to expose the bolts to tighten them. Everything I see is referencing 3/4 gens which have two plugs with caps to access the bolts. On mine it looks like there's only one cover (on top) that pops off.

I have the Rambox on my 2020 HD and it has tie down rails. My question is what is the lower lip on the rail that only runs partway down the length of the rail (see picture). It’s about two feet shorter than the rail (1’ short of each end).

Is there a way to get the rear windows to do the auto raise like the front windows do on the HD Rams?

My 2020 Ram 2500 has the Rambox bed. I have had to replace the plastic clips that connect the solenoid to the lock two times in three years. My question is there anyway to set the number of presses of the fob for the lock/unlock (1 = drivers door & 2 is all other locks) of the Rambox is...

My thermostat was setting off a service engine code for an irrational thermostat, so I swapped it out. The radiator drain is a yellow wing nut and 5/16” hose fits on the drain. I drained just less than 2 gallons from the radiator and it kept me from spilling much when the thermostat was...

My 2020 Ram 2500 has running boards, but they hang down quite a bit (see the two attached pictures of my truck). The other day I saw a Ram 3500 4.5 generation version and the running boards (cab length) hung down less than mine do. However, the brackets looked similar. Is there a version of...

I have seen that Infotainment has a kit to add Blindspot Monitoring (BSM) that works with my Bighorn Ram 2020 - 2500. My question is can I also add the trailer Blindspot Monitoring and what else is needed for the T-BSM? Does the T-BSM use the same sensors and if so is it just a configuration...

The farthest rear mount on the passenger side running board has loosened. It looks like the hexagon hole is striped/rounded, but there is a second hexagon hole. Can I just unscrew it and move it to the second hex hole and then retighten it?

When I got my truck if I towed it turned off the rear parking sensors once the 7 wire plug was attached and when unplugged it seemed to reactivate them. Lately I have noticed the still off after disconnecting the 7 wire trailer plug. The owner's manual say it will disable it when a trailer is...

My OBDLink MX+ does not have any latching ability to keep it in my OBD port. I am concerned that I might bump it and cause it to fall out and lose it as it hangs straight down. Question do you leave your OBDLink MX+ in your OBD port all the time or do you only install it when using it? I have...

I was able to make a backup of my truck’s factory configuration using JScan thanks to @Jimmy07. :) Post in thread 'Kaodtech Bypass Connection Question' https://hdrams.com/forum/index.php?threads/kaodtech-bypass-connection-question.12212/post-313360 When I searched my in files on my phone for...

I am starting to shop for tires and Costco is likely the best option as we’re members. That said I’m seeing that Costco fills tires with nitrogen. How do you adjust the pressure in nitrogen filled tires at HOME for unloaded vs heavy hauling/towing?

I saw where Tazer can enable Winch Mode that can raise idle RPM to user-selected value between 1250 and 2000. Can AlfOBD or JScan do that too?

I have the halogen lights on my Ram 2500 I don't want to swap to LEDs for low beams due replacement LED bulbs scattering light and are hard on other drivers. However, I was wondering if there is a replacement LED bulb for the high beams and if it would be worth the cost as it would not be a...

Has anyone tried the Oracle mirror ditch lights? Wonder if they could be modified to work with power folding mirrors...

Were memory seats ever an option on the Bighorn? I know the seat base is different between the power seats and the memory capable seats.

I am thinking about getting JScan and I download it and I’m looking at the demo. There is a Light Load Inflation Pressure for both front and rear tires. I wonder if this would allow one to have both a max GVW tire pressure setting and a lower tire pressure setting for empty driving?