Search results

Browsing the various overhead console threads throughout the forum, and I wanted to clear some things up. It sounds like overhead consoles from 1500s will fit and work in HDs, probably same parts I would think? Looking at parts on Mopar sites and eBay, it looks like individual pieces of the...

Anyone look into upgrading to the new 14.5 inch screen? If I'm not mistaken, it was added for the 2025 MY. It's Uconnect 5, but supposedly works faster than the old ones? I wonder if it would be just a direct swap for those with the appropriate 8.4"/12" Uconnect 5 screens, or an upgrade to...

My cruise doesn't allow me to select certain speeds. I have the standard cruise and I'm in Canada so it's kph. The only possibility I can think of is maybe internally the cruise is set to mph but the display shows kph? As I'm changing the setting up or down, it'll go in order for a couple then...

I have a very odd situation going on with my rear brake/turn lights. I was testing all the lights on the truck with AlfaOBD to make sure they all work after I made some changes to settings. Now my engine light is on and it's throwing codes for each of the 4 turn lights, front and back. Here's...

DO YOUR OWN RESEARCH. THIS IS STILL IN PROCESS SO THERE MAY BE SOME WRONG INFORMATION. Originally had this as a reply to a different thread (link), but figured it would be useful as its own thread. Total minimum cost with new parts is approx $400 USD for 1 seat or $700 for both front seats...

I've noticed when I turn on my wipers my dash lights will dim after 5-10 seconds, and stay dim until the wipers are turned off. At first I didn't know what was going on because I didn't connect the two since there was the delay, but it is definitely with the wiper setting since that's the only...

Does anyone know what specific parts are needed in order to add them? Quick research on seat parts and every little part comes up as its own thing from what I can tell. No option for the whole seat unless I'm mistaken? So what exactly would need to be changed on the seat specifically? I'm coming...

The pics are from before I installed the extra shims and also cut them and the originals in half to install even more. I realize it's not centered, this was during the initial install just to show that it's obviously never going to be 1/8" in gap on either side as it was. Has anyone else...

Is this possible? Change things through AlfaOBD possibly?

I've seen a few posts regarding making the upgrade. Of course, it is a quite involved upgrade, not simply plug and play. But I haven't seen any new posts or replies about it for awhile. You few that were investigating/researching/tinkering about this, any luck? Possible to do now? I am very...

I'm trying to undo what the previous owner of my truck did. The backup camera was moved from the tailgate handle to next to the license plate. Can someone confirm for me the wiring to this camera? I believe they either removed a cable or cut the end off of one and moved a connection to another...