Forceofwill
Active Member
- Messages
- 143
- Reaction score
- 180
- Points
- 43
Yep, 37x12.5 on 18x9 +18.
Ram Heavy Duty Forum
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
ForceofWill's 2025 Tradesman light build.
- Thread starter Forceofwill
- Start date
Yep, 37x12.5 on 18x9 +18.
Forceofwill
Active Member
- Messages
- 143
- Reaction score
- 180
- Points
- 43
Got the Morimoto XB Tails to work finally. They say for 2019+ HD Rams but there have been changes in wiring for the 2025's as we all know. The third brake light works perfectly but when I initially hooked up the tail lights they didn't work right. The reverse lights came on for the running/parking lights but the blinkers worked. I let Morimoto know and they said they would take them back for me and sent me an RMA. Very good customer service but I actually wanted the lights, not my money back lol. So I decided to get off my butt today and figure it out.
For our 2025's with NON LED tails, we have 4 wires in a 6 pin plug. After some metering, for the truck side of the plug the colors are:
Reverse: White/Purple
Black: Ground
Brake: Green
Running/Parking: White/Orange
I don't have the pinout for the Morimoto side of the plug and there are 6 wires in the plug so I just matched what seemed like the two that weren't working correctly and swapped them. I cut the Red and White wires on the Morimoto adapter harness and put some spade terminals on them and swapped them in the middle. I couldn't for the life of me figure out how to de-pin their plug. The tails work now, it's just the outside is the brake/turn signal and the inside is the running/parking, which is opposite of what I think it's supposed to be. I actually like the look of it this way so I'm just going to leave it. I think they match nicely with the granite.
For our 2025's with NON LED tails, we have 4 wires in a 6 pin plug. After some metering, for the truck side of the plug the colors are:
Reverse: White/Purple
Black: Ground
Brake: Green
Running/Parking: White/Orange
I don't have the pinout for the Morimoto side of the plug and there are 6 wires in the plug so I just matched what seemed like the two that weren't working correctly and swapped them. I cut the Red and White wires on the Morimoto adapter harness and put some spade terminals on them and swapped them in the middle. I couldn't for the life of me figure out how to de-pin their plug. The tails work now, it's just the outside is the brake/turn signal and the inside is the running/parking, which is opposite of what I think it's supposed to be. I actually like the look of it this way so I'm just going to leave it. I think they match nicely with the granite.
Forceofwill
Active Member
- Messages
- 143
- Reaction score
- 180
- Points
- 43
Also, I didn't really notice until now but with a Tradesman I have full convex mirrors. The higher trims have that mirror like 60% of the size with a puddle light or something taking up the rest. I'm really glad I got that full mirror instead of some little light. They're still power adjustable and everything and I have them set to see my back tires nicely and my blindspots. Makes reversing into spots nice and easy when you can see tires and white lines.
Forceofwill
Active Member
- Messages
- 143
- Reaction score
- 180
- Points
- 43
Installed the Decked drawers today. Very pleased with them so far. The tie downs, LEDs and power outlet all clear.
