Added Auto Dim High Beams and Rain Sensing wipers, but not showing up in Settings after AlfaOBD

[salmonbum]

Hey guys.... 1st post. I have a 2020 Power Wagon level 1 since new. It has auto climate and auto high beam dimming mirror. I got a humidity sensor/Rain sensing sensor and the correct mirror with auto high beam sensor (triple checked part numbers) to add since the truck didnt have them. Installed both today and programmed with alfaobd have some issues. The auto high beams I don't think are working. Its not coming up to enable in gauge cluster. When I push stalk fwd its doesn't tell me they are enables.

Alfaobd settings:
1: VehicleConfig 1: Auto Highbeam- Yes
2: 2014 CBC Config I/O & Feat.: Auto High Beam Module Location- ECC AHBM
3: CustSetMenu 1: Auto High Beam CSM Present- Yes

The rain sensor works, but I dont have options to turn on/off in settings. With intermittent wiper on, they will auto when I dump water on sensor.

Alfaobd settings
1. Vehicle config 2. Rain sensor present: Yes
2. Rain sensitive wiper CSM present: yes

I read on chatgpt that its possible my build doesn't have a way to turn on the settings in display? Any help?

 

[salmonbum]

Update. I did remove the auto high beam mirror and turned off all the settings that correspond, but left the rain sensor and settings in. The next day the option to turn on/off showed up on uconnect. Im gonna reinstall the mirror in a day and let the ecu set overnight and see if it shows up