Recent content by tuckjack

Been through this thread multiple times debating whether I wanted 35s or 37s and waiting for the day my stock tires wore down so I could upgrade. I really wanted 37s, but went with 35s for practicality reasons. So, here are 35x12.5R17 E Goodyear Duratracs. It's dirty because ski season.

Have any of you installed a 24v alternator in your Ram or at least know of an available 24v alternator that fits in the existing location for the second alternator in the dual alternator option? I have a 2021 Power Wagon with the dual alternator option. I'm researching removing the second...

No issues here on a 2021 either locking the axles or disconnecting the sway bars. I disconnect and reconnect the swaybars regularly and haven't fun into an issue.

Basically what the title says. Anyone on here install the AEV lift onto a 2019+ PW? I'm specifically looking to hear about ride changes based on the requirement to install standard 2500 springs. I have a 2021 75th Anniversary PW with a Tune M1 camper mounted at all times. Between the weight of...

@Jimmy07 Do you happen to know the part numbers if I just wanted to buy another rear heated seats module to install along with the wiring, instead of taking it out of the existing seat? It's a 2021 PW 75th.

Awesome. Thanks for the solution! @Jimmy07

I removed the driver side rear seat in my 2021 75th Anniversary Power Wagon to install a Goose Gear seat delete. In the process of removing the seat, I disconnected it from the cord that powers the heater. As a result, it seems the circuit is not complete, as the heater for the remaining rear...

Yeah, the photo of the trailer control knob also shows the old style UConnect icons.

Awesome! Rough numbers are great. Thanks so much for the help.

Good question. 6’4” bed. It’s a Power Wagon. Thanks for the offer to help though.

Hi all, I’m working on designing my camper buildout and while I’m able to find most of the bed dimensions on the Ram builder site, I’m missing three I’d like to have. I’m unable to measure myself, because I have a Decked drawer system in the bed at the moment and can’t access the places for...

So that I didn’t take us on a complete thread hijack, when in the truck bed, I use Nite-ize CamJam straps to tie the fridge down to Core Trax mounted on our Decked drawer system.

Okay, so your ARB outlet in the bed is running off a battery (primary or second battery) under the hood? I'm trying to figure out how I can get from my lithium battery in the bed to a fridge inside the cab. All I've come up with so far is to go down through one of the bed holes, along the...

Where did you exit the cab to get to the bed?

When my stock Duratracs wear out, I’m thinking of just upsizing them too. They’ve worked really well in the winter here and same off-road.