Recent content by TCandee

The dealer was able to calibrate the SV cameras after pulling the the front bumper even with the wrong CVPM that infotainment told me to get. The front camera was the most difficult but I think most people have had this issue even with the correct CVPM. $800 for the calibration but most of that...

Hopefully all will be resolved today. I will let you know. Thanks for your help.

Awesome thank you. Just talked to the dealer and they have all the cameras calibrated except the front. I have a large bull bar on the front that blocks portions of the front camera view. They are going to pull it and try again. Hopefully this will fix all issues. If not I guess I’ll have to do...

Thank you. I will give it a shot. Not sure where I am going to find a road with no stripes but I will look around. Did you mean “no visible strips”? I had heard in other threads that it needs some visuals. Just checking.

I had the same issues with the infotainment upgrade. They sent me the wrong screen without the esc off/on. They sent me the correct one and everything works except SV. I bought the cvpm they suggested and I could not get it to calibrate. It is currently at the dealer to see if they can get it...

Ok. I assume you mean the one that says last calibration failed. I’ll change the location where I do the calibration and see if that works. And try to get the codes to clear. Thanks for your help.

I cannot get the error codes for the CHMSL camera to clear. I clear the codes. Then rescan and they are still there.

I have switched my truck from UC4 to UC5. Original and new are the 12” screen. Already had all cameras and surround view. I changed the CVPM module to 56029967AF to match the new radio. I have been trying and trying to calibrate the front, rear, left and right cameras following the steps in...