Recent content by STAR H RANCH

Just curious if laramie heated / cooled seats out of a 2020 3500 will plug and play into a 2022 3500? Is the wiring any different, I've had these seats in my 21 2500 Tradesman, but looking at going to a 2022 3500. Thanks.

Hello all, I have a 21 2500 6.4, I'm going to upgrade to one with a 6.7, may even go with a 3500, I've tried doing some research and thought I would ask on here, are there difference's in suspension and rear ends from the Hemi 2500, and the Cummins 2500? I thought maybe it might have a heavier...

@Jimmy07 any words of wisdom here? Thanks.

I didn't end up buying the Limited seats, I decided to go with seats out of a Laramie, just FYI what I have noticed is most places will only sell them as a set, being both fronts and rear seat together, here is the link to the Limited seats I was looking at, from my understanding they told me...

@Jimmy07 is there a removal tool to take the current crimps out of the 6 way plug, or is it cut the wires out of the 6 way plug and crimp new connectors on them to put into the 12 way plug? Thanks.

I see, but did the seats plug into the prewired plugs you already had there, and can you at least control the backseat from your radio controls until you get the hard switches wired?

My truck is already pre-wired for the rear heated seat, wasn't sure if yours was or not, was curious if it was the same issue as the driver's seat, that they made different plugs or it they were the same plugs.

@Mambavr4 was the back seat plug and play in your application? I’m looking at a set from a 2024 Limited for my 21 Tradesman, just wondering about the back seat? Thanks.

Hello, I'm wondering if I replace all my halogen bulbs with LED bulbs on my 21 2500 Tradesman, will I get error messages from canbus? Do I need to enable led settings in AlfaOBD.

Hello Again Everyone, I'm looking at a great set of Heated / Cooled front seats and a rear heated seat from a 24 2500 Limited to swap into my 21 2500 Tradesman, good looking set donor truck only had 6k on it, anyways I've been doing some reading and what I'm finding out is that I believe the...

Everyone, thank you for the replies, I had a feeling it would be a different T-Case, don't think I'll go that deep to swap out T-Case's for the console swap, just a thought.

Hello All, I’m new to the forum, I have a 21 2500 Tradesman, and I’m wondering if its possible to go from the 4x4 floor shifter to the push button shifter I’m thinking I would like to install a console, with leather seat upgrade, is this possible to be done, has anyone done this? Thank you.