Recent content by Screech

If I put spacers on the rear bags do I also need to lower the bump stops the same amount to keep the total travel for the bag the same? My truck already has a ~1in spacer on the bump stops but I don't know if that is because it has the rear air suspension or if its because it a Rebel. Also...

Look into travel trailer toy haulers. Thats what I pull because I ran into the same issue. The pin weights on them are way higher than a normal 5er and i didnt want to go up to a 3500 so travel trailer was my solution.

Im going say probably not. When I pulled the doors apart to put sound deadener on the outer door skins there was almost none in the the front doors and a large patch in the rear. This was on a 23 Rebel so one of the higher trims. I was in 103 over the summer and had no issues keeping cool.

I just installed amp steps on my crew cab and AMP said i needed the relocation bracket. I couldnt get it and was just going to make my own. I put the steps on and was going to see how much i needed to move the tank but I have about 1/2in between the steps and the tank. I have no idea why...

I put the truck in alt height an hooked up the trailer. It sagged quite a bit then it re leveled but the air suspension never fought me during the process of hooking up the trailer or putting the bars on. I unhooked with the truck at normal height to take some weight off the bars but still had...

Thanks for all the replies. I'm planing putting the truck in alt height then hooking up the trailer and letting it re-level. Then putting the bars on and adjusting the tension. I'm picking up the trailer on Friday so Ill let everyone know how it goes using that process.

Ive got a 2500 with the rear air suspension and Im picking up a travel trailer next week. When I setup the weight distribution hitch should I do it at the normal ride height or at alt trailer height?

AlfaOBD is what I would use and it can do more than just change tire size.

I ended up restoring my backup since I didnt want to deal with the guess what level its on and the potential for fried seat controller.

I am trying to get 3 levels for the heated steering wheel working on my 2500. I was able to enable other features with AlfaOBD just fine but the heated steering wheel settings are still just showing on or off. Ive tried setting it to 2 and 3 levels and its the same thing. I have noticed that...

Hi all I have a 23 Rebel with the level 2 package and I see some of the older higher trims have ambient lights above the the glove box and either side of the steering wheel. There is a small gap under the dash pad where the light would be. I looked thru the parts catalog and can find the...