Ram Heavy Duty Forum

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Recent content by neutroniens

  1. neutroniens

    Dually fender flares

    What wheel spacers do you have? I was going to go with the Micky Thompson tire in 255 85 17 but was worried about the lugs rubbing and wasn't sure if I wanted spacers. I thought about having a wheel shop weld 1/2 spacers to the inner steel wheels but that can open its own can of worms. I don't...
  2. neutroniens

    Dually fender flares

    This is what I used as protective film and Tape for the clips. Proses is straightforward. Install the flares once you cut the nipple off the tab and reverse them then reinstall the clips but Don’t put double sided tape on them yet. Use the masking tape to outline the flares. Then remove flares...
  3. neutroniens

    Dually fender flares

    As for mudflaps, not sure what style you’re looking for, but I went with the Ram OEM accessory rubber mudflap for trucks with flares, and they fit just fine
  4. neutroniens

    Dually fender flares

    On my 2019 2500 I had the bushwhacker flares that come with the rubber seal, not impressed with that way of doing it because the flares will wiggle and jiggle and scuff to paint underneath some people claim eventually it’ll rub through to the metal. Just put some VHB double-sided tape on the...
  5. neutroniens

    Dually fender flares

    68362312AC Front right Spat 68362313AC Front left Spat
  6. neutroniens

    Dually fender flares

    Part numbers you will need. I will look and see if I have the front spat part numbers since I had ordered them previously.
  7. neutroniens

    Dually fender flares

    This is before flares. 255/80R17 6.5 in wheels. no spacers.
  8. neutroniens

    Dually fender flares

    There are a couple threads about how to mount latest Gen OEM flares on trucks that did not come with flares. Which has much more detail. Short version. Trucks that come with flares have holes in the fenders. I did NOT drill holes in my truck. When you get the OEM flares they will have the clips...
  9. neutroniens

    Power steps with air suspension

    Rough Country power steps work without relocating air tank.
  10. neutroniens

    Best tires for a 35OO HD Cummins with Aisin

    All the above are good suggestions. I have the Falken A/T3W in 255/80R17 on my DRW. So far I like them. If you like watching tire reviews. Check This guys reveiws out. I'm sure some people wont agree with him but his reviews give some good info and lots of good views off different tires. Next...
  11. neutroniens

    Customer Satisfaction Notice 71A: Aisin K1 Snap Ring

    My truck shows up under 71A but I have already had my transmission replaced with a new 2023 transmission after the snap ring fix didn't work. Hopefully Rams records are just not up to date.
  12. neutroniens

    How to Decipher the DPF Gauge

    This is my understanding of how the system works based on research and my experience. The Regen starts every xxxx miles or hours of operation. Does not matter what the DPF gauge reads. The system will also do additional Regens based on soot level needs. So if you drive a mix of highway and stop...
  13. neutroniens

    Ancillary light addition help

    Tap into the cab light harness. Passenger side. I have a 22 3500 with oem lights. Last truck was a 19 2500 without cab lights but the harness had the whirring. I cant remember if I had to use AlfaOBD turn on or not.
  14. neutroniens

    '21 3500 Rear Air Suspension - Smoooth Ride!

    You are correct on my new spring configuration. To answer your first question I find the new configuration to be stiffer than stock springs without air in the airbags, but softer than stock springs with air in the airbags, running empty. That is on relatively smooth roads with small bumps. On...
  15. neutroniens

    '21 3500 Rear Air Suspension - Smoooth Ride!

    This is my solution to the less than smooth riding "Ram Air Suspension". I tried adjusting the brackets to have no air when empty. I also adjusted the brackets to have air in both bags when empty. (which lifted the rear over stock ride height) Mixed results both ways had advantages and...
Back
Top