Recent content by MrRogue1

Idea: Once the trailer tires are on the move down the road is it possible at that point the system starts working / working better vs. trailer and tires just sitting still. I have a 40ft gooseneck and trailer tires are far back there… I think the “distance” between the trailer tires and the...

Here is a LINK to the signal booster 433.92MHZ NOTE: I have not tried this as of yet. I’m hoping to find someone that has tried it that would share their experience good or bad with the rest of us. https://a.co/d/6pnEYzw Thanks, Ronald Self

AFTERMARKET TPMS BOOSTER ? A friend sent me a link to a TPMS BOOSTER module that is sold on Amazon. Has anyone ever tried one of these? I need to find a way to achieve a better, stronger, reliable signal from the trailer axles that are pretty far back from the truck on a 40ft gooseneck traiker...

Thanks I will inquire about updates. If we can manage to get them, that might clear up some of the bs problems. When the weak signal sends to the truck I see TTPMS on the dash cluster… but over on the big screen when it showed the trailer with the axle/tire configuration it never shows any...

TTPMS “TARGET TIRE PTESSURE” On the big screen I set the target tire pressure to the trailer tires 110 psi operating max. I noticed each time the system seems to not hold that 110 target psi and it reverts to 50 psi every time. Why ? It would be great to also obtain some type of original...

The tire sensors I purchased are the 0 to 150psi trailer tire sensors. They are in packs of four so I bought three packs. Eight trailer tires on the trailer, two newly assembled spare tires/wheel/sensor and the ended up with two spare sensors for the glovebox. The trailer sensors are different...

Is there an actual signal booster available? That definitely would be ideal.

I did exactly that with eight tires… Four tires at the left and four tires at the right side to sync them up, then reinstalled them. Just dealing with distance and steel structure obstruction between the receiver and sensors.

So it did help getting it out from behind the bumper and allowed for a better direct line of sight possibility… ok I’m gonna have to try something. RAM should of tested this better for sure.

I’ve got everything installed, hardware, software, and it’s up and running. But…. There’s one of two things going on…. The connectivity is extremely sketchy. I am dragging a 40ft PJ Gooseneck trailer where the axles are back away from the truck around 28-30ft(not 100% sure on the distance. I’ll...

2024 RAM 3500 GOT IT INSTALL, UP & GOING Just issues with I think the DISTANCE between number recover module and the eight sensors waaaaaay back under a 40ft PJ gooseneck flat bed trailer. I could get the horn to chirp for tires on the left side of the trailer 1,2,3,4 but the system times out...

On a note of distance from sensor behind the bumper to eight sensors on a 40 foot flatbed gooseneck trailer….. I have read that someone else had to make an extension from the harness under the bumper all the way back, maybe 20 feet or more back underneath the trailer to put that sensor that...

I had none of my trouble so far I did manage to get the body module computer programmed, and I do see the tire pressure system on the screen on the dash that’s not the problem anymore. I parked in my truck underneath the gooseneck of this 40 foot long PJ flatbed 40 footer. It wouldn’t read the...

I got it backed up first before I did anything else and saved it to a file on my desktop. Now I gotta do is pray this old laptop doesn’t die as the dog attacked the door as I was trying to walk through out the back door of the house 110 pound European Dobie got tangled up and all the power cords...

If I don’t see the body computer for the current year that I have do I click on the my 2023+ powernet and go with that ? I have a 2024 RAM 3500 Or am I supposed to specifically only click on the “body computer my 2020 powernet” ?