Recent content by mjb765

Found it.....thanks....

Anybody install a digital rear view mirror upgrade?? There was a kit on BAM Parts, but it's not there any longer. I have a plain mirror--no auto dimming or anything. 2024 2500 laramie. Thanks

I found the issue!! I appreciate everyone's help and ideas, but it ended up being the easiest thing. I took things apart tonight and when I opened the side door to access the large battery connection there was NO nut on the stud!! I never opened the door since it all came prewired and assembled...

Right now it's the just the main connection to the battery. There are only 2 sets of wires coming out of the PDC--the brown wires that connect to the switches and the big red connection to the battery.

I bought this truck off the lot and it had everything I wanted but those switches.....and when i found the kit I thought it wouldn't be that bad.......you would think since it's a kit it would be be done on the inside......Depending on the weather I am not sure when I can continue...

The next step is clearly to take the PDC apart and check all the wiring behind it. That may take some time and the weather is not cooperating right now.

I will check it out, but I am getting ground at the relays when activating the aux switches. It's power thay seems to be the issue.

That's what I always thought.

I have that kit but couldn't find anything on what to do with the rest of the wires It includes the wires that you plug into the light gray and dark gray connectors on the PDC to power the accessories. I will check youtube. Thanksl

I know the relays are all pinned. I just ran out there and looked again. The fuse is in position 4 as my picture shows. The spot to the right that your diagram has a fuse in, has only one pin with no power at it. Maybe I try getting in touch with Mopar ( a long shot) to see they could assist or...

I'm glad you found the instructions and see I'm not nuts.....that was the next thing I was going to attach. As you saw, it shows a very simple hook up that you would think should work. I appreciate the help and ideas. Maybe the far left fuse is the culprit. That would be nice. I have pulled the...

Didn't move anything..this is exactly how it came and how it looks now....Do I need to take this insert out and investigate the wiring below??? All the wiring coming out of the bottom is nicely tie wrapped...I would hate to think Mopar wanted me to disassemble it. But I'll do what I have to.

I have the tools...but what I think I hear is that I have to take apart the PDC and make connections inside?? The unit came fully assembled, harness wire tied with only the wires I described. There are no additional connections unless I need to make them under the board that the relays are...

No real instructions came with it, but I attached a pic of the kit. There is a large wire for direct power to the battery and the smaller harness which runs inside to the switch bank. The six small brown wires send ground to the corresponding relay when the switch is activated. i checked and...

Has anybody installed the 82216450AB kit????