Recent content by Mdim

110K miles on mine, still going strong.

Doing ball joints and ujoints on a 2019 2500. What are you using to press out the upper joints? The outer diameter is 1.9" and most of the press tools are 2"; Can I get something a lot smaller and press on the inner part of the joint?

105K on my 2019, still going strong.

Mine does this when I first start driving. 6.4 hemi with about 100k miles on it. First mile or so if I am light on the gas it kind of surges a bit. Goes away as the trans warms up. Assumed was just cold fluid or something but definitely not something I've experienced in other vehicles.

This...if you are in front of me you are all good. Just don't follow too close in case it decides to panic brake for a squirrel or something...:p

1500 trucks have come a long way over the years but its still tough to compare the stability you get when putting weight behind a 2500. Anything above 5K or so and I really try to avoid the half ton. I tow a 9K pound camper behind my 6.4 2500 and it works great. Definitely doesn't lack for...

That is actually very helpful thank you. I get about 20" on my regular pedals. Which means the adjustable ones will only move me closer, not further away....which doesn't help me a darn bit. A telescoping wheel would be amazing but doesn't seem like an option. Anyways, thanks again, that got me...

Two questions: - First, I've got a 2019 Tradesman without adjustable pedals. How hard is that to swap in? I can buy the pedal setup and switch pretty easily. Is the truck wired for it or are there some harness parts missing? - Second for those that do have these. How does the range compare to...

Just completed the 5" to 8.4" upgrade today. Took the easy/expensive route from Infotainment.com; Probably 30 min swap end to end, works perfectly. I actually build automotive infotainment systems for a living so was kinda painful taking the easy route, but just didn't have time in my day to...

Yep, thats the diagram I was looking at. Odd thing to not sell considering how easy they pop off. But thanks for confirming. It's a pretty fancy chrome plastic part. With enough work could make one but will probably try to find a used piece somewhere. It's not one of those super critical things...

Question about running board parts. In the standard diagram, item 2 (electric) has a breakdown of all parts including the end caps. Items 3 and 4 they don't have a part breakdown. I really need an end cap but can only see a listing for the full unit. Does Mopar really not sell just the end...