Recent content by lugnuts124

Any issues at dealer?

What error messages did you have after changing all configs? I just did mine the other day and had an error message, service cruise or something like that come across dash. I just want to make sure it is functioning properly before I head to dealer..

Went to put the new mirror adapter in today and hang mirror..brand new OEM adapter has a captured bolt in it to bolt to windshield. It was too long and cracked the brand new glass..fml

Appears can system is operating and I have communication out of bcm and rf hub. Seems as if everything is looking for tcm and ecm communicating and not getting it. I guess I need to check for power at both units? Not sure where to look anymore

60ohm if I measure on the original pins I pulled out of dlc

109ohm at dlc with bypass cable installed

Thanks for that info I tested voltage on can high and low and they are 2.6 and 2.5 with everything hooked up Im gonna test resistance now

I shot him a message I had some damage on the one harness at fuse box connections and i carefully repaired it all. If I can’t find a way to pinpoint issues I’d consider replacing that harness but it’s expensive and the whole dash needs to be removed to replace it

Looking for some help Have a Wrecked 2021 6.7 HO was hit hard in left front Battery was shorted, fuse box smashed I have replaced the fuse box with same exact part number Inspected left dash hanress(this is main harness on left side of truck from dash to fuse Box I had a couple damaged wire that...

Oh btw I also swapped in a 50gallon tank and plan to add the digital rearview mirror. Next major hurdle is keys though as I have none. Hopefully I can successfully program a set with alphaobd

Hey all, i know it has been a while since everyone was trying this with mixed results. Well I decided to give it a go. I’m rebuilding a wrecked 21mega 6.7ho Laramie truck. I have never even heard the truck run but we should be to that point by the end of this week. I have installed all the parts...