Recent content by kcustom

Sorry, meant fuse box up front

I let the truck run for almost one hour.... really odd. I think I am going to see if I can find the wiring diagram from the TPIM to the 7 pin plug and see if there is a breaker in line some where. I am baffled....

I was thinking it could be the trailer plug, so I replaced it with a Heavy duty 8 foot. 10 ga on power and ground. what is weird is that when I don't have the truck connected I show the same voltage at pin 4 as dash alt voltage. but when I connect the 7 pin voltage drops to voltage on camper...

interesting tread, I am having an issue when I meter pin 4 and show same or very close voltage to what the truck is showing at front at battery. When I connect my 7 pin to my 5th wheel voltage drops. I have determined that when I connect something causes pin 4 to disconnect from the truck and...

Has there been a solution for this yet? TIA

I have a 2019 Ram 2500 Limited and the front and middle rubber body mounts on the pass side, there is no rubber touching the bolt and a gap of almost 3/4 inch, I have bad clunking noises. is there any insight from the group if the dealer will fix this? TIA

Thanks for the information, any idea what frequency they work on if not 433mhz?

Has Ram come out with a screw on TTPMS sensor for the trailer monitoring yet? Pulling 6 tires off my Triple axle would be a pain to add the in wheel versions. TIA

Thank you sir :)

Just got a new to me 2019 2500 limited (sold my beloved 2015) and this truck has the factory puck system. can I swap the factory center piece for the B&W 1320 so it will work with my Companion hitch? TIA