Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
I will give the depin another try.
When I did my 24 I had it set up such that I had my lights set to trigger to turn on via either the Aux switch or the reverse lights. I put a relay in the back under the spare tire as a diode of sorts in the event that I turned the Aux switches on I would...
Thank you very much. So the pin out should be similar. I should be able to either depin or splice it. On my 24 I couldn’t get it to depin for some reason so I think I just spliced into it. This is very helpful!!!!
Did you also put a relay in so they trigger off your reverse lights? Or only...
Does anyone have the actual wiring diagram itself for the 2025/2026 2500 with the 4aux panel? Just looking to see if it is different/how different it is when I want to put on my rear lights or if I can follow the same logic I used for my 2024 in the attached pic.
Just an update - issue continued to occur to me. I was able to take mine into the dealership and they changed out the clock spring. Since then the issue has not returned. Now, it has been warm here and I haven’t used the steering wheel heater, not sure if that matters or not. But is has been all...
Any updates from anyone? Mine just started doing this today!! Same switches as everyone else. Volume up/down, channel up/down, and left side wheel switches. Cruise works fine. Do not have a pedal
Monster. Unplugged the battery and they work again.