Recent content by Fuely 62

2022 3500 srw Solitude 310 GK-R. Reese Goosebox

Primary filter underneath box, secondary filter underneath the hood. Problem was finally solved after many cuss words , the last time I had someone change the filter they installed an incorrect Wix causing it to get jammed or hung up at the bottom of canister. From now on i will be doing them...

Has anyone ever had trouble removing a Wix secondary fuel cartridge (besides being in a terrible place to access) ? The cartridge seems to be stuck in the canister. Being a Wix there is not much to grab onto.

If you're removing the pipe then why not do it right. Just saying. That's the way I do it, maybe not your way.

I have added aux tanks to my last two Rams. Rather than cut the fill pipe and getting all the filings in the tank I opted for a different route. I found it easier to just remove fill pipe and weld a pipe bung into it, this adding a hose barb. I also added a low pressure inline transfer pump and...

I installed the Mopar 4 pucks for the fifth wheel on my 2015 2500. The holes were already present in in the frame rails to bolt on the pucks, there was no need to unbolt the box. Follow the directions, easy install. Measure twice and purchase the correct size hole saw. When done drilling holes...

Thanks for your response

Not going to argue the issue, but check Grand Designs Reflection.........8' wide. Like I said before I'm sure there's more.

Maybe you should check around some more. I have a friend who has a two year old Jayco that is not 102, and I assume there are more.

Curious, everyone is showing pictures of their rigs in tight turns with the goosebox and an off set 4" ball, but no one has mentioned the trailer width. Does anyone have this set up with a 102" trailer ? I would like to go this route, but use the Gen-y 5" offset goose puc in the RAM puc goose...

Our 5 er.

Sold my 62 Chevy fuely, but here is my 62 Mopar

My 2022 3500. A year old now. Didn't like the factory 2 tone, had it vinyl wrapped with silver after I took delivery.

Howdy Everyone ! New to this site but not to Dodge/RAM. Formerly owned 92 W250 Cummins 4x4, 2015 2500 RAM Cummins 4x4, and presently a 2022 3500 Cummins HO 4x4 ccsb.

I presently have srw 3500 ccsb with aftermarket air bags. I'm currently using B&W Companion Slider with Morryde pin box and would like to upgrade to Goosebox for a better ride and get rid of bulky slider (pain the a@# taking it in and out). I'm pulling a 310 Solitude and till present have not...