Recent content by eludvigs

Update: Pulled out the wiring harness from PSSM to CAN. CAN wires were not twisted. Twisted the CAN wires Cleaned up the ground (was in the engine bay) Cleaned up the hot connection (connected to hot terminal on side of fuse box) Since I did this I have had no issues over the past several...

Current Situation: AEV installed the Mopar boards to my Big Horn when it was upfitted to the Prospector XL I replaced the PSSM with a new one ... same issues I used Alpha to get the options onto the screen ... same issues, but I do see the option to deploy/retract boards and now it tells me...

Thanks man! Yes they are for sure Mopar ... PSSM is in place and wired up. The options sheet from AEV clearly state Mopar and I have installed AMP boards several times so understand the setup on those. Will trace the connections to ensure they are all solid. Guess I need to start pulling some...

Hi everyone. This is a great thread and I've learned a lot from @Jimmy07 and @johanh13. I picked up a 2022 Ram Big Horn which was converted by AEV into the Prospector XL. When AEV did the conversion they added the Mopar power steps as they were not optioned on the Big Horn. After about one...