Recent content by david.dean65

UPDATE... I changed the aftermarket HID fog lights to LED. I did this because I was going through too many HID components prematurely. I installed the LED fogs without the anti-flicker and they work just fine, plus there's less components that needed to be installed. Additionally, I did not...

My 2024 Ram 2500 came with the base model fog lights (non-LED). I installed a XenonPro HID Fog kit that came with the ballasts and anti-flicker modules. I did not need to make any programming changes to the BCM via AlphaOBD, and everything works great. Except that I'm now having to replace...

I've been using Archoil since I bought mine new, for the same reason as most of you, regen and DPF. I have the iDash, but to be honest I haven't taken a close look at the numbers yet. As for better MPG, since using it from the start, I don't have any history to compare to. I am averaging 17.3...

So I finally installed the OEM LED bed light kit. Mostly installed anyways. I ran the wire to the BCM but didn't install it because I haven't been able to psych myself up for that task, as I'm 6'5" and find it somewhat difficult to work under the dash, especially in the area of the BCM. But...

DM sent.

$250 Is not VIN locked. Works fine; I traded the truck in on a 2024 Ram.

Howdy! I'm not new to Ram heavy duty trucks, just new to the hdrams website. I will say that I am a newbie to these new diesels (last truck was a 2005 Dodge Ram 2500/Cummins) and am learning as much as possible from this site.

Thanks!!

Using AlfaOBD, I created a configuration back up. The picture shows what was generated. Is this accurate?

Alright folks. This one is stumping me. So far everything I've read on here has been spot on. And by that, I mean, just about all the install instructions and AlfaOBD guidance are the same. Here is my dilemma. I've got the 2024 Ram 2500, Cummins, and I'm preparing to install the OEM LED bed...

Which wire from the bed light kit did you tap into the white w/brown tracer. The kit comes with 3 wires, one I'll assume is the power to the lights, the second I'll assume is for the lights switch, and the third gets capped off and is not used. And of course there's the ground also. The kit I...