Recent content by Damonb

Its not simple, I responded to your private message with details.

There is no reason to involve the dealer you purchased from, a misguided is a warranty repair and will be paid by Stelantis, not the dealer. If you have the plug on the bumper and they didnt plug the wire in, thats an obviously mis built truck. I would recommend looking at the pic I sent and...

The DRVM on all Ram HDs starting in 23 are DRVM 3.0 meaning the Magna system, The first DRVM was the one that just had the truck cam and no secondary input, used on LD Rams, DRVM 2.0 was the same manufacturer as the first generation but added an input for tow mode camera that went directly to...

I asked that to, he did post a pic of his truck and it appears to be a night edition which requires limited level 1 which includes DRVM. He also stated he has the plug on bumper which would only be there if feature was there so it is certainly a quality defect, likely wires are just unplugged...

Not sure what you mean by normal/tilt view other than the fact that it squishes the entire camera view into the mirror instead of cropping it (like normal driving image) when you put it in Reverse? That is not a true backup view like you would have if you mounted a camera high up with a steep...

If you are asking what the part number is for your Fakra, you shouldnt need it, you should bring to your dealer as they have left out a part that is included in your build. The FAKRA is part of the chassis harness. Get under the truck and look at the back bottom of the can on the drivers side...

He is talking about the rear view mirror. Its an amazing feature to not look at your mirror and see nothing but white. You can clearly see emergency vehicles coming up, you can check on someone following you if you are in a group, its literally the same as having a rearview mirror. Its. Very...

Thats very odd, if you have the DRVM and the jack is there, the wiring would be too. Did you buy it used? Did they relocate it to the bed? Got a pic of the back side of the port? If no FAKRA goes there and its been exposed to the elements, you will need to replace the jack as well as it would...

Anyone know what this 6cavity, 4wire male plug could be behind the light switch mounted to the IP structure? This is a 2024 3500 Cummins HO. Wasn't there on my 22 and I don't have the upfitter or aux switch kit.

Very interesting, did you find what camera they are using, is it actually the same one but the missing repeater is causing the issues? If not, Can you try new cam without repeater? That would make the whole thing work without needing the repeater and cables.

Thank man, do you also have the trailer side adapter? Nice work @CortexM0

@CortexM0 do you have the 3d print file you'd be willing to send?